- Home>
- Products & Solutions:
- Controllers, Recorders & Data Acquisition:
- Service & Support:
- Application Examples:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application note66:
- Application note67:
- Application note68:
- Application note69:
- Application note70 :
- Application note71:
- Application note72:
- Application note73:
- Application note74:
- Application note75:
- Application note76:
- Application note77:
- Application note78:
- Application note79:
- Application note80:
- Application note81:
- Application note82:
- Application note83:
- Application note84:
- Application note85:
- Application note86>
- Application Note
Application Note
Running Program Patterns Using Ladder Functions
Overview
The UTAdvanced ladder function can be used to run programs. You can also incorporate the "guarantee soak" that is required for quenching and other processes on metal parts.
Ladder Usage Points
- You can use the parameters available on UTAdvanced (SP value and ramp rate of change) to build program patterns.
- You can create patterns by setting the SP number with the SP number switching function.
- For the ramp portions of a pattern, you can use the ramp rate parameter.
- Before switching the SP number, you can set an arbitrary ramp by changing the ramp rate parameter.
- You can achieve the soak portion with the specified SP value and a timer, and maintain the guarantee soak while checking the deviation value.
Ladder Program Examples
