AQ7270 OTDR - Yokogawa

	Home / Our Businesses / Test & Measurement / Products / Optical Measuring Instruments /
	Optical Time Domain Reflectometer AQ7270 OTDR

Product Home

Specifications

· Features

Functions

Outside view

Options

Software

Features

1 2 3

Meets fiber testing needs from FTTH to Metro networks!	World's Shortest Dead Zone: <0.8m (2.7 ft)	High Dynamic Range up to 40dB
Less than 10 sec. Power-up Time	Automatic Setting of Measurement Conditions - Full Auto Mode -	Measurement with Auto Wavelength Switching - Multi Wavelength Mode -
Macro's Measurement with Predefined Procedures – One Button Mode -	Assistance Setting Up Measurements – Measurement Wizard -	Active Line Alarm
Plug Check Function	Fault Event Display Function	Trace Fix Function
Setup Key

The worldwide spread of broadband services has stimulated the installation of optical fiber in metro and access networks, which in turn has increased the demand for portable and reliable test equipment to aid the installation and maintenance of these networks.
Our new OTDR has been developed to address these challenges with particular aims of improving operability to boost work efficiency and cost-effectiveness.
The AQ7270 carries forward the basic operation of its predecessors (the AQ7250 and AQ7260 OTDR), while adding a Detail mode for trained technicians with functions for setting of measurement conditions and performing manual measurements.

Automatic Setting of Measurement Conditions -Full Auto Mode-

Simply choose the measured wavelength, then press a button.

Multi Wavelength Measurement is a mode in which multiple specified wavelengths are measured automatically, in order. You can also specify to perform analysis or file saving as needed for each measurement.

Measurement with Auto Wavelength Switching -Multi Wavelength Mode

Prepare multiple wavelengths to measure, then press a button.

Macro's Measurement with Predefined Procedures –One Button Mode

Simply choose previously set measurement procedures, then press a button.

You can execute up to five saved measurement procedures in order. A batch of measurement procedures can be run directly from the main menu. Measurement and analysis conditions can be read from a file, making it easy to set up the measurement procedures.