|
 |
Bandwidth: DC to 50 MHz (-3dB) Maximum continuous input range: 30
Arms Amplitude accuracy (DC, and 45 to 66 Hz, 0 to 30 Arms): ±1%
of rdg ±1 mV
|
|
 |
Attenuation ratio: Can be switched between 1/100 and 1/1000
Max. differential allowed voltage: ±350 V/(1/100), ±1400
V/(1/1000) |
|
 |
Attenuation ratio: 1/10 (with 50 Ω load)
Differential input voltage range: ±12 V |
|
 |
 |
701921 100 MHz differential probe |
Attenuation ratio: Either 1/10 or 1/100
Maximum differential allowed voltage: ±70 V (1/10), ±700
V (1/100) |
|
 |
|
701942 Miniature Passive Probe |
Bandwidth: DC to 350MHz (-3dB)
Attenuation ratio: 1/10 (Fixed)
Maximum input voltage: 400Vrms
Cable length: 3m |
|
 |
|
701944 100:1 Probe |
Bandwidth: DC to 400MHz (-3dB)
Attenuation ratio: 1/100 (Fixed)
Maximum input voltage: 1,000Vrms, 6,000Vpeak
Cable length: 1.2m |
|
 |
|
701945 100:1 Probe |
Bandwidth: DC to 250MHz (-3dB)
Attenuation ratio: 1/100 (Fixed)
Maximum input voltage: 1,000Vrms, 6,000Vpeak
Cable length: 3m |
|
 |
|
701680 Battery box (only works with - DC model) |
Powers instrument for approx. 2 hours
Charging time: approx. 4.5 hours
Max. Power consumption: 200VA |
|
 |
|
B8050WP Battery box connection cable |
For connection between DL1640 Series and 701680. Comes standard
with the 701680 battery box. |
|
 |
|
A1105JC DC power supply connector |
For the DC power supply model (-DC). |
|
|
|
|
|
DL Series Selection Guide
Find the right one for you! |
Serial Bus Analyzer Selection Guide
For I2C, CAN, and SPI analysis |
Probes for Digital Oscilloscopes
Supporting a variety of measurement |
Accessories for DL series
Accessories other than probes |
|
|
|
|
|
