Digital Oscilloscope DL1620/DL1640/DL1640L

	Home / Our Businesses / Test & Measurement / Products / Digital Oscilloscopes /
	Digital Oscilloscopes DL1620/DL1640/DL1640L

Product Home

Specifications

· Features

Software

Testimonials

Accessories

Features

1 2 3 4 5 6 7 8

Explorations	Functions (1)	Functions (2)	The Mobile SignalExplorer: from the Lab to the Field
Web Server/ Saving of Waveforms/ Print Out Functions	Rear Panel Ports	CAN Bus Signal Analysis Function (1)	CAN Bus Signal Analysis Function (2)

A 3-mode power supply (DC power model) that adapts to the various measuring environments, for in-vehicle tests and field use.

The Mobile SignalExplorer: from the Lab to the Field

DC power model + battery box
The DC power model is
available on the DL1640 or
DL1640L.
The main unit must be
connected to ground.

Mode 1: DC 12 V Input

The DL can be driven directly from an in-vehicle battery.

Mode 2: External Battery Drive

The DC power model yields approximately 2 hours* of operation using the battery box (with internal charger). Auquired waveforms are unaffected by the power supply noise.

Mode 3: AC Input

The battery box acts as the AC adapter when an AC input is available. You can measure signal continuously even when the power supply experiences trouble such as a power failure or voltage drop.*

*The operable time varies depending on usage condition.

For Long-Duration or Repeating Measurements

Simultaneous measurement on 4 channels, using the 32 MW superlong memory
History memory stores up to 16,000 waveforms

Recorder-Like Roll Mode Display

High speed roll mode display from 50 ms/div
Calculates and displays waveform parameters during roll mode display, such as P-P, MAX, and Freq
Zoom display available without stopping the waveform acquisition