Digital Oscilloscopes DL9000 Series

	Home / Our Businesses / Test & Measurement / Products / Digital Oscilloscopes /
	Digital Oscilloscopes DL9040/ DL9140/ DL9240 Series

Product Home

Specifications

Features

Functions

Software

· Options

Accessories

Options

1 2

CAN Bus Signal Analysis Function	LIN Bus Signal Analysis	I²C and SPI Bus Analyzer	Built-in Printer
Probe Power	100 BaseTX/ 10 BaseT Ethernet	Power Supply Analysis Function	User-Defined Computation

Factory Installed Options

CAN Bus Signal Analysis Function (/F7, /F8)

Waveform Display and
Analysis Results

Dedicated triggers for CAN Version 2.0A/B (high-speed and low-speed CAN bus signals: used extensively for the internal busses of automobiles, factory automation equipment, medical devices, and other applications) and CAN bus signal protocol analysis functions are available. Two models of defferential probes are available for CAN measurements (sold separately).

- High speed protocol analysis:
Approximately 15 updates/second.*
- Allow real-time analysis and display even during waveform acquisition.

* During continuous measurement at 5 ms/div and record length of
1.25 MW. (Update rates willvary, depending on setup conditions.)

more information

LIN Bus Signal Analysis (Added to the /F7 and /F8 Option

Simultaneous analysis and waveform (decode) display of CAN and LIN bus signals
Analysis functions for LIN bus (widely used as an in-vehicle LAN protocol for car body applications) has been added to the other serial bus analysis functions available on the DL9000. Like the conventional CAN bus analysis function, analysis results are displayed quickly and in real-time. Analysis results are displayed as a list and shown underneath the bus waveform and can be saved to a text file (available with firmware versions 2.40 or later). You can analyze two bus signals simultaneously and also display the results. For example, you can check waveforms and protocol data from two CAN sub-networks of different speeds at the same time, and verify the correlation between the signals. You can measure a CAN and LIN bus signal simultaneously, and also display the results simultaneously.

* LIN bus analysis function supported with firmware version 2.40 or later (/F7 or /F8 option).

I²C and SPI Bus Analyzer (/F5)

This option enables, analysis, and search on I²C and SPI

serial data bus signals. Observing the physical signals of these buses allows you to more effectively separate hardware related problems from software related problems.

(I²C and SPI triggers are standard)

Built-in Printer (/B5)

This built-in thermal paper printer provides a convenient way to print out what is shown on the DL9000’s display.

Probe Power (/P2)

These ports supply power to the following current probes (701932, 701933) and the following differential probes (701920, 701921, 701922, 700924, 700925)

Note: You do not need this option to power the 2.5 GHz active probe (PBA2500).

100 BaseTX/ 10 BaseT Ethernet (/C10)

100 BaseTX/ 10 BaseT Ethernet (/C10)
100 BaseTX/ 10 BaseT Ethernet + internal HDD (/C8)

Network file server/client functions and network printing are supported through Microsoft network file sharing. The SMTP client allows you to send e-mail from the unit. (/C8, /C10)The /C8 option includes an internal 30 GB HDD which can be used to store waveforms and setup files.