A variety of waveform evaluation functions are included. These functions make it possible to display and record waveforms directly, whereas in the past a device such as an O/E converter or oscilloscope was required.

Included Functions

The stability function can be used to obtain stability data over a 24-hour period, and to save the obtained data to a CF card. This function eliminates the need to write a data acquisition program operating through the GP-IB interface.

AQ2200-231 optical sensor head

Item		Product specifications
Detector type		InGaAs φ5 mm
Wavelength range		800–1700 nm
Power range	CW light	–90 to +10 dBm
	Chop light	-90 to +7 dBm
Applicable fiber type		≤100/140 µm (SI), NA ≤0.3
Uncertainty under reference conditions		±2%
Total uncertainty		±3.5% ±50 pW
Polarization dependence		0.025 dBp-p or less
Linearity		±0.015 dB ±50 pW
Noise level		50 pW or less
Averaging time (minimum)		100 µs
Optical connector		AQ9335C connector adapter

AQ2200-241 optical sensor head

Item		Product specifications
Detector type		Si 10 mm
Wavelength range		400–1100 nm
Power range	CW light	–90 to +10 dBm
	Chop light	-90 to +7 dBm
Applicable fiber type		≤200/230 µm (SI), NA ≤0.5
Uncertainty under reference conditions		±2.5%
Total uncertainty		±5% ±50 pW
Polarization dependence		-
Linearity		±0.005 dB ±50 pW
Noise level		50 pW or less
Averaging time (minimum)		100 µs
Optical connector		AQ9335C connector adapter
See GS810518900 for details

Product Home

Specifications

Interface Module

Frames