|
The measurement procedures and settings for harmonic/flicker standards testing have been precisely defined. Engineers must also stay current with the specialized knowledge and up-to-date information required to periodically review the contents of the standards and perform the standards conformance tests. The model 761922 Harmonic/Flicker Measurement Software enables engineers without specialized knowledge to perform a range of operations using the WT3000 Precision Power Analyzer including judging standards compliance and outputting test reports. |
|
- · Harmonics
EN61000-3-2 / IEC61000-3-2
- Limits for harmonic current emissions
(Equipment i rated current of 16 A per phase or less)
- EN61000-3-12 / IEC61000-3-12 New!
- Limits for harmonic current emissions
(Equipment rated current is of 75 A per phase or less, and more than 16 A per phase)
- JIS C 61000-3-2
- Limits for harmonic current emissions
(Equipment rated current of 20 A per phaseor less)
- · Voltage fluctuation/flicker
EN61000-3-3 / IEC61000-3-3
- Limitation of voltage fluctuations and flicker
(Equipment rated current of 16 A per phase or less, and not subject to conditional)
- EN61000-3-11 / IEC61000-3-11 New!
- Limitation of voltage fluctuations and flicker supply systems
(Equipment rated current of 75 A or less, and subject to conditional)
|
|
*Product registration is required. |
- WT3000*:
IEC61000-4-7 2002, Harmonic and interharmonic measurement supporting window widths of 50 Hz/60 Hz, 10/12 cycles.
*: 2A input element model is not supported.
- WT2010/WT2030:
IEC61000-4-7 1991, not support interhamonic measurement.
- WT1600:
Harmonics only, not conformity to IEC standard.
|
|
| November 30, 2007 | Compliance with the IEC61000-3-11 and IEC61000-3-12 standards. |
| April 7, 2006 | |
| April 7, 2006 | The updated trial and upgrade version of the software program is available for download.
|
|
|
| · |
761922 Harmonic/Flicker Measurement Software |
|
|
|
|
C
