- Numeric List*
You can display numeric data by cycle.
Numerical data that changes over time can be checked one
at a time using the scroll bar.
* requires /CC option
|
- Power Trends*
The power value P and three-phase power values
from each element can be displayed.
You can check for changes in power
between individual cycles.
* requires /CC option
|
- Torque Trends*
You can check for changes in torque value
between individual cycles,
and check the stability of a motor when starting or
when running at constant rpm.
* requires /CC option
|
|
- Numeric Data
WTViewer can simultaneously display voltage, current, power and
various other measured parameters for one to four elements
individually, and for ΣA and ΣB calculations.
|
- Measuring Harmonics*
WTViewer can numerically or graphically display the results of
measured harmonics up to the 100th order for such parameters as voltage,
current, power and phase angle.
* requires /G6 option
|
- Vectorial Views
In harmonic measurement mode you can view a vectorial display of the fundamental
voltage, current and phase angle. This visual presentation of the interphase
relationship in a three-phase power system shows the load condition intuitively.
|
- Viewing Trends
You can capture and view various types of data, measured with the WT3000 on
your PC in a graphical trend format. This feature lets you monitor power supply
voltage fluctuations, changes in current consumption and other time-based variations.
|
- Setting Up the WT3000 from a PC
With WTViewer, you can control the WT3000 main unit from your PC,
including setting the wiring method, range, filter, scaling, and so on.
WTViewer also lets you save or read the settings of the WT3000 onto your PC.
|
- Converting Data to CSV Format
With WTViewer, you can save waveform and numeric data to your PC.
From the PC you can create *
.wtd files hat can be loaded in WTViewer, or *.csv files that can be imported into Excel spreadsheets.
Example data in Excel
|
- FTP client function*
This function allows data stored on the WT3000’s PC card to be transferred to
a PC for displaying and conversion.
* requires /C7 option
|
|
