LL200
Avviso: Questo prodotto non è più disponibile dal….

The software package used to create custom computation programs and custom display functions for UT750/UP750. computation program upload and download, file management, debugging and printing functions are available. The funciton of LL100 is also included.

Resources

Transmit them in the order: Custom computation data → parameter settings.
Since the custom computation building tool cannot hold AINn and PVn scale data, the limit check cannot be performed on the input value when you select EU or EUS for the unit. Therefore, it prevents you from entering a value. If the unit is set to EU ...
This is for securing readout of custom computation information. If you set an LL password when downloading, it will be required for uploading, computation monitoring, and executing comparisons with the controller. Even if a password is set, it is not...
Yes, the latest version of the LL100/LL200 can connect to instruments with serial ports, as in previous versions.
The LL100/LL200 installation failed.
(ns-faq-green-9099-soft)
Please check the following. Have you met the minimum system requirements? Are you using full-width characters for the login user name?  
Yes. Use the Multimonitor function.
Yes. Click the Open menu command. In the user file open dialog box, under File type, select the extension of the old tool file, or All files. Select the files you want to open. The file name extensions of the old tool are 4td, 5td, 5pd, 7td, and...
In the upper part of the screen, from the Edit item, select Segment delete.
For example, if you select UP550 format and "open" a UP750 file, the format will be UP750. But if you "Open program pattern data," you will open the UP750 file in UP550 format. By using the "Open program pattern data&quo...
Yes, if it is an enhanced model. If the product has been enhanced, an "E" appears on the front panel model name, as in "UT320E."
1 to 3600 seconds. However, if there are many units connected and the setting is short, processing may not occur within the trend interval. If this happens the on-screen communication status lamp will turn red, and you should slow the interval settin...
Up to 65000 times' worth of data can be saved, regardless of the trend interval. Note that if 65000 is exceeded, the oldest data is replaced by new data.
No. LL100/LL200 has been discontinued.
What is the Batch copy function?
(ns-faq-green-9108-soft)
The Batch function is for copying all program patterns of a single controller. <Collective reading> All patterns in a program pattern controller are saved, 1 pattern per file, to a specified folder (on a PC hard disk). Ex.) If you perform coll...
Yes, by using the Multilogging function. However, all data are not saved. Only data that was saved to CSV. Unsaved data is discarded.
CSV file format.
The adapter might not be attached properly, or the adapter batteries (2 x AA) may be spent. If using the UT320/321/350/351, check whether the LL parameter on the main unit is ON.
Can I extend the LL100/LL200 cable?
(ns-faq-green-9093-soft)
Yes. Use a standard USB extension cable. Note that per the USB standard you should not use an extension cable longer than 4 meters.
It requires a USB port.
What are the LL100 and LL200?
(ns-faq-green-9086-soft)
They are software programs for the Green series. In addition to setting parameters, the LL100 comes with functions including program pattern creation, tuning, and multi monitoring. The LL200 has the functions of the LL100 plus a UT750/UP750 custom co...
A total of 16 loops can be monitored. Cascade control entails using 2 loops per controller, therefore 8 units could be connected.
The following OS are supported. Windows XP (Home Edition/Professional) (x32) Windows Vista Business (SP1) (x32) Windows 7 Professional (x32/x64)  
2.7 meters.
No. LL100/LL200 has been discontinued.
The UT300/400/500/700 series, and the UP350/351/550/750. However, the LL200 custom computation function is only compatible with the UT750/UP750.
The software itself, USB drivers, adapter, cable, and user's manual.
By design, UP350/351 program patterns are set by using the parameter setting tool.
For single-loop models such as the UT351, up to 16. For 2-loop control on the UT750, up to 8.
The DI settings are made unavailable to protect the DI connection set in the custom computation tool. (in the same manner, the controller main unit also skips the display) If you want to change the U*M=21 DO, use the custom computation creation tool....
Is there any sample custom computation data?
(ns-faq-green-9065-program)
Sample data is available for each control mode. We recommend that you modify these samples to create your own.
The DO settings are made unavailable to protect the DO connection set in the custom computation tool (in the same manner, the controller main unit also skips the display) If you want to change the U*M=21 DO, use the custom computation creation tool. ...
The software program LL200 (sold separately) is required for the UT750/UP750, and LL1200 (sold separately) is required for the US1000.
This is because the unit of the controller's user parameter differs from the unit specified in the parameter setting tool. You will have to either use the unit from the controller on the parameter setting tool, or use the custom computation build...
As for individually writing parameters via CC-Link, changing OUT area values constitutes a write request. In your case, since the OUT area value hasn't changed from the previous value, the SP value is notoverwritten. As a fix, periodically copy t...
Yes, you can use the GREEN-UTAdvanced parameter data conversion tool (available as free download). Using the LL100/LL200 parameter setting tool, save the GREEN series parameters to a file, convert them using the conversion tool, then apply the settin...

Downloads

Cerchi più informazioni su tecnologia, soluzioni o sulla nostra squadra?

Contattaci

Top