Near Infrared Analyzer NR801EL

	Home / Our Businesses / IA / Products / Environmental.. / Near Infrared.. /
	Near Infrared Analyzer NR801EL

Near Infrared Analyzer (At-line model)
Model NR801EL

Product Information

NR801EL Near Infrared Analyzer (At-line model)

The InfraSpec NR801 EL is the at-line model of NR800 series FT-NIR analyzer. It employs exactly the same hardware in the heart of the system (interferometer and detector) as NR800 process model and thus realizing high S/N (signal-to-noise) ratio, high wave number resolution and wide wavenumber scanning range those done in the NR800 process model. Direct model transfer to/from the NR800 series including process model is another key feature. This model transfer capability will drastically cut down model implementation time and cost at project stage while it provides more flexible and efficient model upgrade during routine operation.

Software specially developed for at-line model, SpectLand 2 at-line, will make operation simple and user-friendly and will improve the work efficiency for at-line and Lab. measurement application.

Bulletin

General Specification

Features

*	Newly developed high-performance interferometer and detector.
*	Calibration model transfer and share between NR800 series.
*	Various types of measurement cells (cuvette, vial, probe, and flow-through, etc.,).
*	High-speed Ethernet communication between PC and the analyzer.
*	At-line analysis software (SpectLand 2 at-line) for simple operation.

Specifications

Location	Non-hazardous area, indoor. Avoid exposure to wind and rain, sunlight or radiation heat.
Principle	Fourier-transform Near Infrared analyzer via fiber-optic cable, Double beam
Measurement method	Optical transmission absorption
Detector	InGaAs (Indium Gallium Arsenide)
Light source	Halogen lamp
Wavelength range	900 to 2500 nm
Wavelength accuracy	0.04 cm^-1
Wavelength repeatability	0.007 cm^-1
Wavelength resolution	4, 8, 16, 32, 64 cm^-1 selectable
Number of channel	1 channel
Number of measurement	Max. 12 per analyzer
Measurement time	4 seconds as minimum(depending on the number of averaging and measuring channels, as well as measurement items)
Communication interface	Engineering PC: 1 channel (Ethernet)
Contact output	Two points; Purge failure, analyzer failure
Enclosure	General purpose type: Model NR801EL; with CE mark Model NR801JL; Japanese version
Power supply	100, 115, 200 or 230 V AC ±10 %, 50/60 Hz; consumption:approx. 200 VA
Environment temp., RH	0 to 35 deg C, 0 to 85 % RH
Weight	Approx. 35 kg