Setup and Tuning Functions
All required parameter settings such as actuator type selection, auto-tuning selection, and zero/span adjustment can be done on screen. A Setup Wizard is available for first-time users who wish to be guided through the basic setup procedures one step at a time. |
 |
| - |
Configuration
Parameters related to the setup of the YVP110 are shown and can be changed. |
|
| - |
Calibration
Tuning related parameters are shown and changes such as executing auto-tuning can be made. |
|
| - |
Trend Display
A graph charting such values as the position set-point and the feedback signal can be displayed, and this trend data can be used to modify the tuning settings. |
|
| - |
Diagnostics Functions
Diagnostic parameters such as valve operating status and valve characteristics are shown. It is easy to compare the original valve characteristics and that of current data. A user interface for the signature function is provided to measure, display, and save the characteristic data to relevant valves and positioners. |
|
|
| - |
File Management
Saving Configuration data can be readily saved and accessed at any time. |
|
| - |
Downloading Function
Configuration data can be douwnloaded directly to the device. |
|
| - |
Report Function
A configuration data list can be output in HTML format. |
(19KB)
