Safety Training | Yokogawa United Kingdom Ltd.

As a plant operator, engineer or technician, you are involved in safety life cycle activities and you have a responsibility to equip yourselves with the necessary knowledge to perform your functions properly.

Yokogawa provides a broad range of Instructor led courses next to certified TÜV Rheinland trainings. To help you enhance your knowledge and awareness of safety systems during different phases of project execution, as well as provide competency to control the process in a safe environment.

Functional safety courses by Yokogawa safety specialists

The Functional safety training programs are designed to provide an understanding of the real-world challenges safety engineers and operators face in the industry and provides formal recognition of their achievement upon passing an assessment. Also, it provides the necessary level of understanding of functional safety to plant operators and technicians to help them carry out their duties. At the end of the course you will have a good understanding of safe practice in operation and maintenance as well as how your actions affect process safety.

Three reasons to attend Yokogawa Safety courses

1.   Small groups (max. of 12 participants) with plenty of room for individual attention
2.   Experienced trainers, specialized in Functional Safety in your industry
3.   Sharp price

Yokogawa standard safety training program includes:

Functional Safety for Operations (with FS Technician (TÜV Rheinland) certificate in SIS)
Functional Safety Engineer (with FS Engineer (TÜV Rheinland) certificate in SIS)
Functional Safety for End-users
Introduction to Safety Systems
Customer specific functional safety training programs

The training programs can be held at organization's premises or in an off-site training facility.

Functional Safety for Operations with FS Technician (TÜV Rheinland) certificate in SIS)

Objective:	Provide operators, maintenance technicians and all those who are involved in the maintenance and operation of Safety Instrumented Systems (SIS) with elementary and necessary knowledge about functional safety, based on the international standards IEC 61508 and IEC 61511. This is a training of the TÜV Rheinland Functional Safety Training Program, which is the only safety course provider where you maintain your functional safety competency: after 10 years, you are invited back in our classroom to refresh your safety knowledge and get updated to the latest version of the IEC standards.
Who should attend?	This course is ideally suited for maintenance- and instrument engineers or operators whom will be involved in testing, maintaining and decommission of Safety Instrumented Systems (cradle to grave).
Prerequisite knowledge:	In accordance with the TÜV Rheinland Functional Safety Training Program: a minimum of 2 years’ experience in the field of functional safety and a technical diploma or certificate or equivalent engineer-level responsibilities status as certified by the employer.
Programme:	Day 1 • Module 1: General introduction • Module 2: Standards IEC 61508 and IEC 61511 • Module 3: Installation & Commissioning • Module 4: General aspect for all phases Day 2 • Module 5: Overall Safety Validation • Module 6: Operational phase • Module 7: Maintenance and Repair • Module 8: Proof testing • Module 9: Modifications • Module 10: Decommissioning and Disposal Day 3 • Examination
Examination:	At the end of the course, the participants must take an exam. The examination contains two parts. Part one consists of 30 multiple choice questions and part two consists of 5 open questions. The passing score is 75%. If you pass the exam, you will receive the FS Technician (TÜV Rheinland) certificate in SIS.
Methods of delivery:	Interactive lectures and exercises (both group and individual exercises).
Trainer(s):	Safety Assurance and Consultancy group of Yokogawa Europe.
Duration:	2,5 days
Number of Participants:	6 to 12 participants
Data:	click here to see all the dates and places.

Subscribe form

Functional Safety for Engineering (with FS Engineer (TÜV Rheinland) certificate in SIS)

Objective:	Provide engineers that are involved in the engineering and realization of Safety Instrumented Systems (SIS) with elementary and necessary knowledge about functional safety based on international standards IEC 61508 and IEC 61511. This is a training of the TÜV Rheinland Functional Safety Training Program, which is the only safety course provider where you maintain your functional safety competency: after 10 years, you are invited back in our classroom to refresh your safety knowledge and get updated to the latest version of the IEC standards.
Who should attend?	Instrument Engineers, Application Engineers, Site Engineers, Modification Engineers who are involved in the design and realization of safety related systems.
Prerequisite knowledge:	A minimum of 3 years’ experience in the field of functional safety and a Bachelor degree (or higher) as a minimum or equivalent engineer level and responsibilities status as confirmed by the employer
Programme:	Day 1: • General introduction • Module 1: Introduction to Functional Safety • Module 2: International safety standards IEC 61508 and IEC 61511 • Module 3: HAZOP – SIF – SIL Day 2: • Module 4: Safety Engineering • Module 5: Functional Safety Management • Module 6: Failures and hardware fault tolerance Day 3: • Module 7: Common cause influences and other failure types • Module 8: Safety calculations • Session for asking questions Day 4 (morning): • Examination
Examination:	At the end of the course the participants must take an exam. The examination consists of 60 multiple choice questions and 7 cases. The passing score is 75%. If you pass the exam, you will receive a FS Engineer (TÜV Rheinland) certificate in SIS.
Methods of delivery:	Interactive lecture Exercises (both group exercises and individual exercises)
Trainer(s):	Yokogawa trainers are highly qualified: they have extensive experience in Functional Safety in your industry and possess formal qualifications in addition to training and assessment standards.
Duration:	3.5 days
Number of Participants:	6 to 12 participants
Data:	click here to see all the dates and places.

Subscribe form

Functional Safety for End-users

Objective:	The objective is to provide participants with elementary and necessary knowledge about functional safety based on international standards IEC 61508 and IEC 61511.
Who should attend?	Architectural and/or Basic Designers, Lead Engineers, Project Engineers, System Engineers, Application Engineers, Site Engineers and Project Managers involved in safety projects.
Prerequisite knowledge:	Participants should have an affinity with industrial safety.
Programme:	Day 1: • General introduction • Module 1: Introduction to Functional Safety • Module 2: International safety standards IEC 61508 and IEC 61511 • Module 3: HAZOP – SIF – SIL • Module 4: Safety Engineering Day 2: • Module 5: Functional Safety Management • Module 6: Failures and hardware fault tolerance • Module 7: Safety calculations • Module 8 : Installation and commissioning • Module 9 : Operations, maintenance and prooftesting • Module 10 : Modifications and decommissioning • Assessment
Methods of delivery:	Interactive lecture Exercises (both group exercises and individual exercises)
Trainer(s):	Yokogawa trainers are highly qualified: they have extensive experience in Functional Safety in your industry and possess formal qualifications in addition to training and assessment standards.
Duration:	2 days
Number of Participants:	6 to 12 participants

Information request Functional Safety for End-users

Introduction to Safety Instrumented Systems

Objective:	Give a basic understanding of the role played by safety systems for industrial production processes in preventing personal injury, environmental damage, damage to equipment and loss of production. The course will cover the terminology used for safety systems, the international standards IEC 61508 and IEC 61511 which cover all safety life-cycle activities and the safety solutions offered by the Yokogawa ProSafe Systems family. This introduction training is always customized with a focus on your companies’ topics. Please contact us to discover the possibilities.
Who should attend?	Operators, engineers, management etc., interested in the various aspects of safety systems for industrial production processes. Prerequisite knowledge is not necessary.
Programme:	Day 1: • Welcome and course introduction • Usage of safety systems • Safety systems terminology • International standard, IEC 61508 and IEC 61511 • Introduction to Yokogawa ProSafe systems • Evaluation
Trainer:	Yokogawa trainers are highly qualified: they have extensive experience in Functional Safety in your industry and possess formal qualifications in addition to training and assessment standards.
Duration:	1 day or as agreed otherwise

Information request Introduction to Safety Systems

Customer-specific functional safety training programs

We offer customized training programs to equip your team with the necessary knowledge and skills for maintaining a safe working environment.

Contact us to start enhancing your team's functional safety expertise. Our dedicated team will assist you in understanding your training needs and guide you through the enrollment process.