LL1100
Avviso: Questo prodotto non è più disponibile dal….

The software package that enables you to set the configuration parameters of model US1000 Digital Indicating Controller via the optical communications adapter attached on controller front panel. Parameter data upload and download, read, write and print parameters, file management, trend display, tuning functions are available.

Resources

No. LL100/LL200 has been discontinued.
The adapter might not be attached properly, or the adapter batteries (2 x AA) may be spent. If using the UT320/321/350/351, check whether the LL parameter on the main unit is ON.
Can I extend the LL100/LL200 cable?
(ns-faq-green-9093-soft)
Yes. Use a standard USB extension cable. Note that per the USB standard you should not use an extension cable longer than 4 meters.
2.7 meters.
No. LL100/LL200 has been discontinued.
We apologize for this. These parameters cannot be set using the tool (both terminal and front panel communications) due to the specifications of the controller main unit.
Check whether the LL parameter on the controller is ON. If using RS-485 communication, turn it OFF. If it is already OFF, check the following. If front panel communication, ON If rear panel communication, OFF If it is already OFF, check the following...
In the controller specifications, communication and LOCK parameters cannot be set with the LL100/LL200.

Downloads

Cerchi più informazioni su tecnologia, soluzioni o sulla nostra squadra?

Contattaci

Top