pH in MICA - color pigment manufacturing

Download (402 KB)

Introduction

Pigment producer manufacture produces pigments to supply to paints, plastics, inks, construction, textile and cosmetics manufacturers etc. The pigments come under wide range - general purpose grades, high performance, and specialist hard-to make colours and effect pigments.

Color Paint Cans

Pigments and chemicals form an intrinsic part of many industries. They serve as raw materials in the manufacturing of Plastic, Rubber, Paint, Paper, Textile, Tiles, Detergent Powder and Soaps, Inks, and Photo Films etc.

Pigments come in a wide variety of colours and some are water-soluble. For these reasons, many of these compounds have been produced, isolated, and characterized.

Among the most important variables affecting processes, pH and temperature are environmental conditions with a strong effect on the pigments. Thus, it is very important to control them in industrial bioprocesses.

Balancing the pH

The degree of acidity or alkalinity of a solution, known as pH, is measured from 0 to 14. Acid solutions measure 0 to 7. Alkaline (smells like ammonia) solutions measure 7 to 14. Pure distilled water measures 7. There are instruments to measure pH, or you can rely on sense of smell. The binder should have a slight ammonia odor. We are shooting for a pH range of 8.0 to 8.8. The acrylic polymer used to make paint becomes unstable at a pH below 7.5. Adding a dispersion may lower the pH below the optimum range. Also, adding thickeners will typically lower the pH. If polymer binder starts looking and acting like cottage cheese then chances are pH is too low. Try raising the pH to salvage the batch. Do this with the drop-wise addition of Ammonium Hydroxide (NH4OH) while mixing. If the mixture does not respond to the pH correction, allow it to dry out for disposal.

Controlling Viscosity and Rheology

Thickness or viscosity is generally well understood. Rheology usually bears a bit of explanation. Long rheology refers to a stringy, resinous, quality, like that of honey. Industrial enamels and automotive paints often exemplify these qualities. Short rheology refers to a smoother, less "ropy" paint formulation, typical of what acrylics and oil paints are known to be. To create different rheologies, you can choose the appropriate gel or medium to combine with the dispersion. These are pH sensitive polymers that swell up when the paint's pH is 8.0 - 9.5 (It is critical to keep the paint in this range.)

Ammonia is used to maintain the pH in the acceptable range. Ideally, this is determined with a pH meter, and is characterized by a slight ammonia odor. You will feel the mixture get thicker as you proceed. (If you are getting chunks it may be a result of adding the Thickeners too quickly or insufficient mixing.) Blend until the mixture is smooth and of the desired thickness.

Typical Process details as an example:

List of difference applications

Typical problems 

  1. What is the concentration of these chemicals?
    • Customer may say it is difficult to give concentration of these chemicals.
  2. What is the process pressure?
    • Process pressure: atmospheric pressure
  3. Calibration frequency
    • Once in a day. Customer has observed drift of @1 PH every day i.e. why calibration is done daily.
  4. Scaling?
    • Yes scaling shall be observed on electrode
  5. CIP/SIP
    • No.
  6. Typical sensor life @1 1/2 months to max. 2 months
  7. Process temp.
    • varies from -5 to +105 deg C, typical batch process temp. will be 95 degC (changes from manufacturer to manufacturer)

Remedies

  • Use sensor with most chemically resistant Ryton body.

Product Recommendation

Measurement System

Process Liquid Analyzer: 

  • 2-wire FLEXA pH/ORP Analyzer
2-wire FLEXA pH/ORP Analyzer

Features

  • Dual sensor measurement on 2-wire type analyzer
  • Indication of sensor wellness

 

  • 4-wire FLXA402 pH/ORP Analyzer

4-wire FLEXA402 pH/ORP Analyzer

Features

  • Connectable to up to five sensor
  • Easily viewable color LCD
  • Touch screen operation

Sensor Selection:

pH immersion fitting like PH8HS / equivalent with PH8EFP sensor.

PH8HS/equivalent with PH8EFP

Features

  • With the body made of Ryton, a strong engineering plastic, which is comparable to Teflon in terms of corrosion resistance and heat resistance, it allows for a wide range of applications.
  • The integrated-sensor design simplifies calibration with standard solutions and maintenance.
  • The pH glass electrode of a pH sensor, the platinum or gold electrode of a ORP sensor and junction can be individually replaced.

Tangible benefit

More reliable and accurate analysis of pH which helps to improve end product quality and total operation cost is less.

Note: For additional information on this application contact the local Yokogawa Process Liquid Analyzer Department

Industrien

  • Base Chemical

    Yokogawa has been serving the bulk chemical market globally and is the recognized leader in this market. With products, solutions, and industry expertise, Yokogawa understands your market and production needs and will work with you to provide a reliable, and cost effective solution through the lifecycle of your plant.

    Mehr anzeigen
  • Chemical

    Chemical plants rely on continuous and batch production processes, each posing different requirements for a control system. A continuous process calls for a robust and stable control system that will not fail and cause the shutdown of a production line, whereas the emphasis with a batch process is on having a control system that allows great flexibility in making adjustments to formulas, procedures, and the like. Both kinds of systems need to be managed in available quality history of product, and to be able to execute non-routine operations. With its extensive product portfolio, experienced systems engineers, and global sales and service network, Yokogawa has a solution for every plant process.

    Mehr anzeigen

Zugehörige Produkte & Lösungen

  • 2-Leiter-Analysator FLXA202/21

    Die Analysatoren der FLEXA-Serie werden für kontinuierliche Online-Messungen in industriellen Anlagen verwendet. Mit der Option für die Ein- oder Zwei-Sensor-Messung sind sie die flexibelsten 2-Leiter-Analysegeräte auf dem Markt.

    Mehr anzeigen
  • 2-Leiter-Messumformer/-Analysator FLXA202

    Die Analysatoren der FLEXA™ Serie werden für kontinuierliche Online-Messungen in industriellen Anlagen verwendet. Mit der Option für die Ein- oder Zwei-Sensor-Messung sind sie die flexibelsten 2-Leiter-Analysegeräte auf dem Markt.

    Mehr anzeigen
  • pH/ORP Sensors PH8EFP, PH8ERP, OR8EFG, OR8ERG

    Yokogawa's pH and ORP analyzers are highly reliable. They feature advanced functions and are useful for a wide variety of applications including water quality management in a broad range of production processes and in medium-sized wastewater treatment plants, or as general pH and ORP control systems.

    Mehr anzeigen
  • Leitfähigkeitsanalysatoren

    Leitfähigkeitssensoren und -analysatoren werden für die kontinuierliche Messung und Überwachung von Leitfähigkeit, Widerstand, prozentualer Konzentration und gesamte gelöste Feststoffe (TDS) eingesetzt. Anwendung finden diese Sensoren beispielsweise in Entsalzungsanlagen oder bei der Abschlämmung von Kesseln.

    Mehr anzeigen
  • Leitfähigkeitssensoren

    Leitfähigkeitssensoren dienen zur Messung von Leitfähigkeit, Widerstand, WIFI, prozentualer Konzentration und den gesamten gelösten Feststoffen (TSD). Anwendung finden diese Sensoren beispielsweise in Entsalzungsanlagen, der Wasseraufbereitung in Umkehrosmoseanlagen oder bei der Abschlämmung von Kesseln. Die verschiedenen Installationsoptionen schließen u. a. Wechsel-, Durchfluss- und Eintaucharmaturen sowie den direkten Einbau ein. Die richtige Auswahl von Sensoren ist für optimale Messergebnisse von entscheidender Bedeutung.

    Mehr anzeigen
  • pH- und ORP-Analysatoren

    Sensoren und Analysatoren für pH und ORP (Redox) werden zur kontinuierlichen Überwachung von pH- und ORP-Werten im Prozess eingesetzt, z.B. um die Wasser- und Produktqualität sicherzustellen oder um Abflüsse, Batch-Neutralisierung, Zellstoffbestand, Gaswäscher, Kühltürme, chemische Aufbereitung, Wasser- und Abwasserbehandlung und viele andere Anwendungen zu überwachen.

    Mehr anzeigen
  • pH- und Redoxsensoren

    pH-Elektroden und -Sensoren sind die detektierenden Elemente bei der Messung des pH-Werts. Die verschiedenen Installationsoptionen schließen u. a. Wechsel-, Durchfluss- und Eintaucharmaturen sowie den direkten Einbau ein. Die richtige Auswahl von pH-Elektroden und Sensoren ist für optimale Messergebnisse von entscheidender Bedeutung.

    Mehr anzeigen

Top