Surface Scattering Light Turbidity Detector TB830D

"Reduce maintenance"
 "Digital solution for water quality"

Many of our customers face these challenges - Yokogawa Turbidity Analyzers TB800 series resolve them.

Yokogawa's turbidity meters have been developed and improved to suit various applications in water treatment plant turbidity measurement. As a result, we have accumulated many achievements and gained the trust of our customers since our first product was launched in 1959.

Japan’s most trusted turbidimeter*.

The TB830D is part of the SENCOM4.0 platform family and can connect to FLXA402T. Thanks to a smart unit equipped detector, TB830D gives you more insight into the ordinary operation.

The TB830D is a turbidity analyzer that equipped LEDs as the light source, is dirt-resistant, and offers reliable measurements and reduced OPEX due to the addition of advanced diagnostic functions.

*Based on a Yokogawa survey in 2019
 

About OpreX

OpreX is the comprehensive brand for Yokogawa’s industrial automation (IA) and control business and stands for excellence in the related technology and solutions. It consists of categories and families under each category. This product belongs to the OpreX Analyzers family that is aligned under the OpreX Measurement category.

Details

Less susceptible to contamination due to non-contact with the sample

Compatible with various applications

  • Surface scattering measurement method minimizes contamination
  • LED light source for 3-year long life and reduced maintenance costs
  • High sensitivity and high accuracy with long-standing reliability
  • Good linearity and reproducibility
  • Measuring range from 0-2 NTU to 0-2000 NTU
  • Improved cleaning system reduces maintenance
  • Easy-to-clean cell structure (by GS)

Less susceptible to contamination due to non-contact with the sample Compatible with various applications

Display: easy to see, easy to use

 

Multi sensor input
Not only Turbidity Detector but also Chlorine Sensor Unit, pH sensor and conductivity sensor are connectable to one transmitter.

Multi sensor input

 

 

Application

Turbidity of tap water, sewage, river water and water used in general processes.

Water Purification Treatment

  • Sedimentation 
  • Flocculation 
  • Settling Basins 
  • Clean water reservoir 
  • Distributing pump 
  • Distribution tank & Piping 

Wastewater Treatment 

  • Discharge/Reuse 

Turbidity of tap water, sewage, river water and water used in general processes.

 

Easy maintenance Turbidity analyzer

Through IOT supports remote monitoring of measurement information, setting information, equipment information (health), and alarms

Digital technology gives you insight into field based problems. You can look into and understand causes before
heading to site. This reduces maintenance time and increases efficiency.

For details on the FLXA402T Analyzer, please refer to the Liquid Analyzer for Turbidity/Chlorine FLXA402T page.

Easy maintenance Turbidity analyzer

 

Turbidity Typical System configuration

Without sampling system

Without sampling system

With automatic cleaning and automatic zero calibration

With automatic cleaning and automatic zero calibration

Specifications

Measuring method Surface scattering method
Measuring Range
(Turbidity standard: Formazin)
0-2 to 0-2000 NTU
Sample Conditions Temperature 0 to 50°C
Flow Rate 1.5 to 2 L/min
Pressure 500 kPa max
Power Supply 100 to 240 V DC, 50/60 Hz
Digital Communication Modbus TCP/IP, Modbus RTU
Installation Indoor (Outdoor use requires protection against rain.Direct sunlight must be avoided.)
Cleaning system Automatic wash

 

Performance

Linearity 0-1000 NTU: ±2% of reading or ±0.04 NTU whichever is greater
over 1000 NTU: ±4% of reading
Repeatability ±1% of reading or ±0.02 NTU whichever is greater

Downloads

Cerchi più informazioni su tecnologia, soluzioni o sulla nostra squadra?

Contattaci

Top