On-site Start-up at Installation

Overview

The SMARTDAC+ GM10 is employed by customers who are device manufacturers when they deliver a device to the end user, for on-site monitoring to check that the delivered device is operating stably. If settings are made to the SMARTDAC+ GM10 in the office beforehand, then all that is necessary is to take it to the site and begin data acquisition thus, anyone can conduct on-site data acquisition.

On-site Start-up at Installation

Advantage

  • Acquire data for a fixed period to check operational stability
  • Perfect for situations where the on-site environment is sub-optimal or it is impossible to set up a PC
  • Can ask even personnel unskilled in operations to just push the start button to begin data acquisition

Produse & Soluții similare

  • Modular GM10

    SMARTDAC+TM GM10 data logger has a modular architecture that can acquire necessary data. By supporting not only I/O but also many communication protocols such as 920MHz wireless, Modbus and so on. Monitor and setting changes are available through Bluetooth. Supporting FDA 21 CFR Part11 and AMS2750E/NADCAP.

    Vezi mai mult

Sus