The DTSX is a unique and innovative temperature monitoring system that uses fiber optic cable as a temperature sensor.
Risk of Fires / Dust Explosions in Assembly Process and Impact on Business
In the lithium-ion battery assembly process, air is taken in via exhaust air ducts to eliminate the influx of contaminants. However, there is the risk of dust explosions as fine aluminum dust is taken in during the process. Almost all parts of exhaust air ducts extending over long distances installed in buildings are in blind spots such as roof space, and fire smoke due to dust explosions is discharged outside of the building. Consequently, fire tends to be discovered late.
Emergency stoppages in the assembly process not only cause production loss but also the adverse affect of late deliveries, trust issues and drop in competitiveness has a major social and economic impact on society and the economy.
Solutions and Benefits
Fiber Optic Cable Ensures the Comprehensive and Economic Monitoring of Exhaust Air Ducts in Assembly Process
In addition to the increased need for patrols and maintenance such as the cleaning of exhaust air duct, the roof space where the duct is installed is environmentally harsh - dark or cold (or hot).
Moreover, as installation sites are located in high (i.e. Dangerous) places, an additional load is placed on work. Monitoring independent of manpower is important to prevent fire or dust explosion.
However, conventional sensing methods considered as means of monitoring these are subject to the following limitations.
- Thermo camera: Many units (i.e. large investment) are required to cover exhaust air ducts in roof space that has lots of blind areas.
- Point sensor: Sensors must be sited at many points along the exhaust air ducts that extend over long distances.
The number of man-hours required for their installation, wiring, treatment of cable ends, and other work is considerable. And, the risk of failure increases.
With the fiber optic heat detector DTSX1, fiber optic cable is laid in even ducts that extend long distances. This is more economical than conventional sensing methods, and all exhaust air ducts can be comprehensively monitored.
It can be flexibly configured and set to suit on-site environments as a means of detecting abnormal temperature in a way different from that of point sensors as it supports a difference with external thermometer alarm in addition to simple upper limit and rate-of-change alarms. This leads to discovery at an early stage and quick initial response which limits damage to a minimum.
DTSX1 conforms to EN54-22 the EU fire detection and fire alarm system standard, and is currently used as a fire detection sensor.
It is also in use likewise in ducts for industry sectors other than lithium-ion batteries.
Features of Optical Fiber Sensing in DTSX System
The Fiber Optic Cable Is The Temperature Sensor
Temperature distribution monitored every 1 m
- Monitoring distance : to 50 km
- Monitoring temperature : -200 to 300 °C
- Shortest monitoring cycle : Approx. 5 seconds
- Temperature resolution : 0.03 °C
*: each specification dependent on conditions
- 24 hours a day, 365 days a year monitoring even in wide areas and ordinarily non-manned areas
- Power supply not required, explosion-proof, not affected by electromagnetic noise
- Flexible installation
- High compatibility with DCS and other host systems (Modbus / TCP)
Other In-vehicle Lithium-ion Battery Applications
Monitoring of Soundness of Power Supply Bus Bar
The soundness of the joints of the power supply bus bar installed in lithium-ion battery is monitored. Abnormalities are not overlooked as fiber optic cable is built into the bus duct and bus bars extending over long distances in blind areas such as roof space are comprehensively monitored.
(For details, refer to "Monitoring of Soundness of Power Supply Bus Bar -In-vehicle Lithium-ion Battery Applications-".)
Smart Monitoring of Manufacturing Process Shelves and Storage Shelves
Thermal runaway of lithium-ion batteries mounted on individual shelves is discovered at an early stage. This enables a quick initial response when an abnormality occurs to limit damage to a minimum.
(For details, refer to "Smart Monitoring of Manufacturing Process Shelves and Storage Shelves -In-vehicle Lithium-ion Battery Applications- ".)
Monitoring of Separator / Electrode Coating Drying Furnace Temperature Distribution
The temperature distribution inside the drying furnace of the coating drying process for the separators / electrodes that make up a lithium-ion battery is visualized. Optimizing the temperature profile improves productivity.
(For details, refer to "Monitoring of Separator/Electrode Drying Furnace Temperature Distribution -In-Vehicle Lithium-ion Battery Applications-".)
Yokogawa is enhancing the quality and performance of European battery technologies; accelerating the growth of electro-mobility, shortening the journey to net zero.
Produse & Soluții similare
DTSX1 Fiber Optic Heat Detector
DTSX1 stores the functions required for heat detection in one box. DTSX1 analyzes the temperature data with high accuracy by measuring with fiber optic sensor cable and perform high temperature heat detection.
DTSX200 Distributed Temperature Sensor
The DTSX200 is a standard version that is ideal for temperature measurement, for medium-sized areas, and for areas where the distance of fiber optic sensor cables is short. It has excellent environmental resistance because it consumes less power and is less dependent on the temperature measurement environment.
DTSX3000 Distributed Temperature Sensor
The DTSX3000 is a distributed temperature sensor developed in response to the demand that “one unit be used to monitor temperature distribution a longer distance and a wider area”. A flagship model that meets the expectations for long-distance temperature measurement and high temperature resolution.
Distributed Temperature Sensor - Fire Detection/Fire Prevention -
We adopt technology that the optical fiber cable itself functions as a temperature sensor.
Since it measures temperature distribution over a long distance and a wide range, partial temperature change is not overlooked. Therefore, it is effective not only in the plant but also in fields requiring temperature monitoring.
Contact a Yokogawa Expert to learn how we can help you solve your challenges.