TAMURA Hiroshi 1 TOKUMOU Teruhiko 2 SAKUMA Osamu 3
The amended Law Concerning Rational Use of Energy was enforced on April 1999 and the Specified Household Appliance Recycling Law will come into effect on April 2001 (both in Japan) in an effort to create a sustainable society in the face of worsening global environmental problems. Although conventional product design has focused on quality, cost, and lead time, manufacturers such as Yokogawa are required to include the environmental impact factor in the design. Hence, manufacturers must assess their product design so as to minimize the environmental impact of the product throughout its life-cycle from purchase of the materials and parts, through manufacturing and distribution, to use and disposal. This paper introduces Yokogawa's design guideline, design criteria, and assessment tools for assessing product designs and developing environmentally friendly products. An example result of a "green" design and the practices of self-declared environmental labeling are also given.
Environmental friendliness (E) must be assessed in today's product design in addition to the conventional design considerations of quality (Q), cost (C), and lead time (D). Hence, the product design system must be urgently restructured in order to minimize the environmental impact of a product throughout its life-cycle from purchase of the materials and parts, through manufacturing and distribution, to use and disposal.
In 1997, we began enhancing the guidelines and standards for engineers by including information on how to engineer and design environmentally friendly products as well as how to assess them. We have now issued the design criteria and assessment standards for environmentally friendly product design as shown in Figure 1.
Environmentally Friendly Product Design Guideline
This guideline was drawn up in order to define mandatory rules regarding environmentally friendly product design. The intention is not to hamper miniaturization, which has long been one objective when designing a product, since it helps reduce the impact on the environment, but rather to take into account the disposal of products. The design aspects stipulated in this guideline include:
Environmental Assessment Standard for Product Design
Figure 1 Design Criteria and Assessment Standards for Environmentally Friendly Product Design
This standard defines the criteria for assessing the environmental impact of each product designed according to the aforesaid Environmentally Friendly Product Design Guideline, to ensure that the design considers reduction of environmental impact and that the design targets are set from the early stages of product design. The progress of the series of assessments to be performed in accordance with the following rules stipulated by this standard is recorded in the Product Design Assessment Record Form shown in Table 1:
We set an overall reduction of 25 percent from Yokogawa's previous model as the guideline for improvement, and our aim is to incorporate this reduction in the environmental impact in designs.
Table 1 Product Design Assessment Record Form
Figure 2 Configuration of Life-cycle Assessment Tool
Standard for Products Containing Toxic Substances
Regarding the need to take environmental protection into account also when selecting parts and materials when designing a product, the Standard for Products Containing Toxic Substances stipulates the use of toxic substances contained in products including packing materials. This standard categorizes toxic substances into prohibited substances and reduced-usage substances, and controls their usage.
Figure 3 Example of Comparison Chart using LCA Tool
Based on this standard, the currently used parts were researched and databases for eco-material selection were built. Each engineer is required, when assessing each product based on the Product Design Assessment Record Form, to check with these databases whether any of the parts for the product contain a prohibited substance that affects the environment.
Life-cycle Assessment Standard
A life-cycle assessment, or LCA for short, is a method to comprehensively evaluate the impact of a specific product on the environment throughout the lifecycle of the product, from material purchase, through manufacture and distribution, to use and disposal. We have developed an LCA tool for assessing a product quantitatively on a micro level in terms of energy consumption and carbon dioxide emissions. For the database, this tool uses NIRE-LCA from the Institute of Resources and Environment Technology in Japan. Figure 2 shows the configuration of the LCA tool, and Figure 3 an example of a comparison chart created using the LCA tool.
Figure 4 ORP1200 (previous model, left) versus OR100 (right)
The OR100 oscillographic recorder is an example of an environmentally friendly product that resulted from implementing the green design systematically from the early stages of development. Figure 4 compares the appearances of the OR100 and the previous model, the ORP1200. First, an environmental assessment was performed for the ORP1200 and identified high environmental impacts in many aspects including the power consumption, mass, and hard-to-recycle parts. The detailed design policy was then drawn up, taking these problems into account. As a result:
Figure 5 Yokogawa's Eco-label
We have drawn up authorization criteria and rules of practice for the Type II self-declared environmental labeling schemes stipulated by ISO 140212 as of 1999. The authorization criteria allow the eco-label to be attached to only those products that:
Figure 5 shows Yokogawa's eco-label, which symbolizes a leaf and a panel meter, which was the main product of Yokogawa when it was established. The environmental data of the corresponding product, including the improved points and an advocacy that deserves special mention, are shown beneath this label. To date, authorization has been given to seven models: DX100/200 DAQSTATIONs, DL7100 digital oscilloscope, PZ4000 power analyzer, DL1540C/CL digital oscilloscopes, and MV100 data logger. This achievement is described on a website that is open to the public. The eco-label is also printed on promotional documents in order to promote "green" purchasing.
In the twenty-first century, manufacturers will be required to take actions toward reverse logistics, namely, to promote recovery, recycling, and disposal of products, in order to create a more sustainable society. Although there are few social controls applicable to Yokogawa's products at present, we remain committed to developing environmentally friendly products with reference to the controls that apply to household electrical appliances and the like.
Model Names: DX100 and DX200
Model: MV102, MV104, MV106, MV112, MV204, MV208, MV210, MV220, MV230