SA stands for SENCOM Adapter (Model SA11). This is one piece of a new product platform. The SENCOM 4.0 series has been released to replace the original SENCOM product line from Yokogawa. The new SENCOM 4.0 SA11 Smart Adapter uses a similar digital process to measure the process values, store data, perform calibrations, and report data to a host system. One obvious difference is that the SA11 Smart Adapter is a separate device, not permanently attached to the sensor as the original SENCOM sensors are. The SA11 is part of our SENCOM 4.0 platform, consisting of an FLXA402 transmitter, a Sensor with a Variopin connector and ID Chip (i.e., FU20-VS or FU24-VS), and Cables.
ilgili Ürünler & Çözümler
-
All-in-One pH/ORP Sensor Series FU20 and FU24
The FU20 and FU24, all-in-one pH and ORP, sensors show how Yokogawa applies the motto "Simple is best" to sensor technology.
-
Multi Channel 4-Wire Analyzer FLXA402
The FLEXA™ series analyzers are modular-designed analyzers used for continuous online measurements in industrial installations. They offer single or multi-sensor measurement.