What does SA stand for?

SA stands for SENCOM Adapter (Model SA11). This is one piece of a new product platform. The SENCOM 4.0 series has been released to replace the original SENCOM product line from Yokogawa. The new SENCOM 4.0 SA11 Smart Adapter uses a similar digital process to measure the process values, store data, perform calibrations, and report data to a host system. One obvious difference is that the SA11 Smart Adapter is a separate device, not permanently attached to the sensor as the original SENCOM sensors are. The SA11 is part of our SENCOM 4.0 platform, consisting of an FLXA402 transmitter, a Sensor with a Variopin connector and ID Chip (i.e., FU20-VS or FU24-VS), and Cables.