I'm using a µR with an SD memory card (/EM1), and I get the message, "Error 233" SD card access error. What should I do?

Error 233 appears when you attempt to save measured data to the SD memory card but the card can't be recognized. Make sure the card is inserted correctly. Also, try FUNC key > Data save > Stop (you can stop even if the SD memory card is not inserted).

ilgili Ürünler & Çözümler

  • µR10000 & µR20000

    The μR series are the compact industrial recorders with the recording widths of 100 mm (μR10000) and 180 mm (μR20000). Measured data can be saved to an SD memory card while recording on chart paper.

    Daha Fazla Gör

En üst