Vietnam VN   
Can you tell me how to add a module and perform measurement for SMARTDAC+ GX/GP series?

Can you tell me how to add a module and perform measurement for SMARTDAC+ GX/GP series?

You can set the measurement conditions by reconfiguring (module detection). Do not reconfigure while recording is starting. When reconfiguring, do not do any of the following.

  • Turn the power ON/OFF
  • Insert or remove modules

For details, see “Reconfiguring the GX/GP (Module identification)” in the first step guide (IM 04L51B01-02EN).

 

Related Products & Solutions

  • Touch Screen GP10/GP20

    The SMARTDAC+TM GP10/GP20 is a portable paperless recorder with a modular architecture on the back panel and has a data logging function to acquire the required data. By supporting not only I/O but also many communication protocols, you can connect to various devices. GP utilizes AI. Supporting FDA 21 CFR Part11 and AMS2750E/NADCAP.

  • Touch Screen Paperless Recorder GX10/GX20

    The SMARTDAC+TM GX10/GX20 is a panel mount paperless recorder with a modular architecture on the back panel and has a data logging function to acquire the required data. By supporting not only I/O but also many communication protocols, you can connect to various devices. GX utilizes AI. Supporting FDA 21 CFR Part11 and AMS2750E/NADCAP.

Top