The Viewer cannot determine the numbers after the decimal with statistical computation on DI input. Data acquired and results computed by the BFD32 are affected by the decimal of the specified measurement range. For DI (contact input), a 4.2 µA current (using a power supply for burnout) flows and the open/close determination is made. It is set so that less than 10 KΩ is 1 (close), and 10 KΩ or over is 0 (open). For the range, the number of places after the decimal is fixed at 0. Therefore, if the Viewer calculates statistics on DI input data acquired by the BFD32, the range's number of decimal places is 0, and the computed value's decimal places are rounded to either 0 or 1.
Related Products & Solutions
-
DA100-1
Model Name: DA100-1
-
DA100-2 Portable Hybrid Recorder
DA100-2 Portable Hybrid Recorder
-
DC100 Data Collectors
Model Name: DC100
-
DP300
Model Name: DP300
-
DP320-1x
Model Name: DP320-1x
-
DP320-1x/MLT
Model Name: DP320-1x/MLT
-
DP320-8x
Model Name: DP320-8x
-
DP320-8x/MLT
Model Name: DP320-8x/MLT
-
DP321
Model Name: DP321
-
DP350
Model Name: DP350
-
DP410
Model Name: DP410
-
DP800, DP801, DP810, DP811, DP820
Model Name: DP800, DP801, DP810, DP811, DP820
-
DR130
The DR130 can record data in 10 colors from all measurement points at 2-second intervals. It has a variety of recording functions including analog trend recording over an effective recording width of 150 mm, recording of digital measured values, recording of various messages, zone recording, and partially compressed and expanded recording, thus enabling data to be read off speedily.
-
DR231
Model Name: DR231
-
DR232 (Expandable model only)
DR232 (Expandable model only)
-
DR241
Model Name: DR241
-
DR242
Model Name: DR242