FN110-R1 Field Wireless Gateway

FN110 is based on the industrial automation wireless communication standard ISA100.11a of the International Society of Automation (ISA). This product is ISA100 Wireless gateway optimized for a small system. Using this product with "Interface Adapter LN90" makes launching a wireless system easier , reducing start-up time.


Easy to set up :

This product acts as system manager, security manager, gateway, and backbone router based on ISA100.11a. Easy to construct small scale field wireless network with combining Remote Terminal Unit (RTU) or other controller.

Built-in high-performance wireless communication function :

The high-performance built-in wireless communication module has excellent radio sensitivity and low power consumption, provides a stable wireless communication platform with excellent power saving capabilities.

Compact and light weight :

This product has been made compact and extremely lightweight as an explosion proof antenna with a built-in wireless communication module.  As a result, flexible installation in the industrial environment is possible.


Standard Specifications

Wireless Specifications Communication protocol ISA100 Wireless (IEEE802.15.4)
Data rate 250 kbps
Frequency 2400 – 2483.5 MHz license free ISM band
Radio security AES 128 bit
RF Transmitter power 12 dBm (eirp)
Antenna 2 dBi (Omni directional)
Power Supply Specifications Power Supply Voltage 2.9 - 4.8 V
Consumption current Max. 60 mA
Performance Specifications Digital Communication for FN series Communication Method: Half-duplex communication (RS485 compliant)
Communication Speed: 9600 bps
Communication Distance: Max 20 m (dedicated cable)
Installation Environment Ambient Temperature Limits Operating: -40 to 85°C (attitude up to 3000 m)
Regulatory Compliance Statments Telecommunication Compliance MIC Identification (Japan), FCC Approval (United States), IC Approval (Canada), R&TTE Directive (EU Countries)
CE Conformity Radio Spectrum: EN 300 328
EMC: EN 301 489-1, EN 301 489-17, EN61326-1 Class A Table 2, EN55011 Class A
Safety: EN61010-1 (Indoor/Outdoor use), EN62479
Canadian Safety Standards CAN/CSA-C22.2 No.61010-1
CAN/CSA-C22.2 No.94.1, CAN/CSA-C22.2 No.94.2
IEC 60529
Degrees of Protection IP66, IP67 and Type 4X apply when the connector is properly tightened.
Explosion Protected Types IECEx Type n
Physical Specifications Weight 100 g

Performance Specifications

Modbus communication for PLC/RTU
Field Wireless Subnet 1 subnet
Field Wireless Device Max. 20 devices (update rate: 2 to 3600 s)
Max. 10 devices (update rate: 1 s)
Modbus communication for PLC/RTU Communication Mode: Half-duplex communication (RS485 compliant)
Communication Speed: Max. 38400 bps
Communication Distance: Max. 20 m (dedicated cable)
Diagnostic Functions Power failures, wired communication failures, firmware internal errors, memory errors, abnormal temperature



Water is often determined by FT-NIR in a variety of pure solvents and chemicals. Here we describe three such applications. Process streams for industrial solvents and pure chemicals are typically clear, free of particulate matter for the most part and easily measured using transmission cells.


Looking for more information on our people, technology and solutions?

Contact Us