"Improved Detection of Bus Bar Overheating"
Bus bars for high current power distribution
Bus bars are uninsulated strips of a highly conductive metal such as copper or aluminum. As they have lower electrical resistance than insulated power cables, they can carry large electrical currents and are thus suitable for use in power distributions systems in power plants, substations, factories, and data centers. Bus bars are also used in power distribution boards. Bus bars offer great flexibility as they are made of highly malleable metals that can be easily shaped to suit any number of facility layouts.
Abnormal overheating of bus bars
Bus bars are bolted, clamped, or welded to each other and to other apparatuses. If a bolt or clamp comes lose or a welded joint fails, abnormal heating may occur at that location due to an increase in the electrical resistance. The overheating further increases the electrical resistance and can lead to a burnout or even a fire.
In order to prevent overheating at any of the bus connections, the connections should be inspected on a regular basis. However, as the bus bars are often inside plastic or metal bus ducts and covers, and are often in difficult to access locations, visual inspection can be difficult.
The burning out of a power supply bus bar is a threat to plant safety and can lead to an unplanned shutdown of plant operations. To eliminate such risks and avoid the huge costs of lost production, it is vital to quickly detect and immediately respond to any indication of overheating in a power bus bar.
The Solutions and the Benefits
24/7/365 temperature monitoring to detect overheating
Burnouts in a power bus bar can be prevented by quickly and accurately detecting abnormal rises in temperature and locating the hot spots. As bus bars are surrounded by strong electric fields, conventional electric sensors such as thermocouple thermometers are not suitable for this purpose. Bus bars also sometimes follow complicated paths through plant structures and other types of buildings and may have a number of blind spots that cannot be readily imaged using thermal imaging cameras.
The Yokogawa DTSX is a unique and innovative temperature monitoring solution that uses an optical fiber cable as a temperature sensor. Since the sensor is not affected by electromagnetic noise, the DTSX is able to monitor distribution of temperature in units of 1 meter accuracy under a strong electric field. By quickly detecting overheating and pinpointing the location of a hotspot, the DTSX ensures that any problem can be responded to immediately, before it leads to a costly and expensive plant shutdown.
The optical fiber cable can be installed directly on a bus bar and on the surface of a bus duct or cover.
Efficient inspection inside bus ducts
Thanks to its ability to continuously detect abnormal rises in temperature and pinpoint hot spots even when a bus bar is located inside a bus duct, the DTSX is also useful in maintenance applications such as locating bolts that need to be tightened.
- Accurate temperature monitoring under a strong electric field
- Flexible sensor cable for complex extended structure
- Quick detection with abnormal location to prevent burnout
- Condition based inspection work by temperature changes
How DTSX Works
Measuring the intensity of Raman scattered light
Using pulses of laser light beamed through an optical fiber cable, the DTSX is able to detect temperature-dependent variations in signal frequency that are the result of a phenomenon known as Raman scattering that occurs along the entire length of the optical fiber cable, and it also can determine the locations of those temperature readings using light that is bounced back (backscattering) to the source.
Example: Along a 6,000 meter optical fiber cable, nearly 6,000 measurement points
By measuring how long it takes light to make a round trip back to the source (backscattering), the DTSX is able to calculate the location for each temperature reading. Abnormalities can be located with a spatial resolution of just one meter.
YOKOGAWA provides equipment and solutions that support various battery manufacturing processes.
Súvisiace produkty a riešenia
DTSX200 Distributed Temperature Sensor
The DTSX200 is a standard version that is ideal for temperature measurement, for medium-sized areas, and for areas where the distance of fiber optic sensor cables is short. It has excellent environmental resistance because it consumes less power and is less dependent on the temperature measurement environment.
DTSX3000 Distributed Temperature Sensor
The DTSX3000 is a distributed temperature sensor developed in response to the demand that “one unit be used to monitor temperature distribution a longer distance and a wider area”. A flagship model that meets the expectations for long-distance temperature measurement and high temperature resolution.
Fiber Optic Temperature Sensor DTSX
The DTSX fiber optic temperature sensor, which uses optical fiber for the temperature sensor, quickly detects and locates abnormalities in equipment by monitoring temperatures at production facilities located far away and across wide areas 24 hours a day, without omission. Highly accurate predictive maintenance avoids downtime and ensures stable plant operation.