Pulp & Paper: Instruments and Solution for Pulp & Paper Industry

Pulp & Paper Plant for the World Process for Fundamental Materials, Requires Effective Production with vast Operational Excellence

Challenges in the pulp & paper plant

Continuous technology improvement is ongoing in the pulp & paper industry to obtain the best possible performance. The improved plant performance translates to the higher quality improvement and lower cost, and simultaneously environmental friendly plant operation.

In the pulp & paper plant, there are many critical applications to measure the severe process condition, such as corrosive chemicals, aggressive pulp slurry with extremely high temperature and pressure condition. And stable and accurate measurement and control in these severe process condition and hash environments is the key to optimize the process control and the performance of plant operation.

As your best solution partner

For many years, Yokogawa has developed the process measurement & control product line-up with the collaboration with pulp & paper industry based on the process knowhow and experiences.

Yokogawa's wide and powerful sensors line-up are available with ''best-fit-model selection'' for every process in the pulp & paper plant, and delivers stability, precision, robustness in process measurement even under the challenging application such as digester and washer in chemical pulp plant. The high performance and intelligent controller helps to achieve higher quality production control in the pulp and paper.

Safe and Realizable Plant Operation

The predictive diagnostics availability of sensors delivers the predictive maintenance capability. The combination of the reliability of field-proven technology, and the latest technology of intelligent diagnosis strongly support higher level of safe and reliable plant operation at low cost.

Why buy Yokogawa?

The reliable and accurate measurement & control with Yokogawa's sensors and controllers support to achieve the dual aim of the high quality production at low cost and environmental friendly plant operation. In addition, the Yokogawa's experienced project handling and service capability in the pulp & paper industry support the successful project execution and life-cycle optimization in your plant.

Washer: Monitor Filtrate Liquor

FLXA202 & PEEK sensor
FLXA202 & PEEK sensor

Overview and Problems

  • Filtrate conductivity monitor
  • Existing electrode type conductivity sensors are easy to clog

Solution

  • Wide measurement span
  • No clogging of black liquor

Benefits

  • Fast response
  • Low maintenance cost and time

Bleaching filtrate: Monitoring pH Value

FLXA202 & Chemical sensor
FLXA202 & PH4C

Overview and Problems

  • Excessive Cl2O weaken paper intensity
  • Existing residual Chlorine deteriorate the electrode

Solution

  • Special anti-corrosive glass membrane
  • Special anti-corrosive structure of Ag ion trap

Benefits

  • High accuracy to improve paper intensity
  • Low maintenance cost and time
Chemical Pulping

Digester / Blow Line: Pulp Slurry Flow Measurement

Pulp Slurry Flow MeasurementOverview and Problems

  • Slurry noise (10 wt% pulp slurry)
  • High abrasive fluid (solid material)

Solution

  • Dual frequency excitation
  • Standard high frequency 75 Hz
  • Optional high frequency 160 Hz
  • Ceramics lined AXF
  • PFA Lined AXF with metal hat earth-ring

Benefits

  • Stable and accurate measurement under aggressive slurry
  • Leak-free ceramic liner construction
  • Longer life-time by robust design

Adhesive Fluid Measurement

Adhesive Fluid Measurement

Overview and Problems

  • Adhesive chemicals
  • Wood resin adhesion
  • Dye adhesion

Solution

  • ADMAG CA
  • Mirror finished AXF
    - Ceramics lining
    - PFA lining
  • Predictive electrode coating Diagnostics function

Dryer: Pressure Control

YS1000 series
YS1000 series

Overview and Problems

  • Steam pressure control in drying process
  • Renewal demand for obsolete controllers
  • Need centralized data monitoring

Solution

  • Easy to use
    Color LCD display with a wide variety of screens includes meter display that is suitable for the replacement of conventional controllers
  • Control output backup function
    Dual CPU & Hard manual
  • Remote data monitoring via Ethernet

Benefits

  • Safe and stable control at low cost
  • Less engineering for replacement

YS1000 series is available also for other processes in pulp & paper industry.

Stock Preparation: Density Control

SMARTDAC+ with UTA/MDL model

SMARTDAC+
with UTA/MDL model

Overview and Problems

  • Control pulp density and flow
  • Need both functions of controllers and recorders
  • Need high reliability under harsh environment

Solution

  •  SMARTDAC+ recorder can be manipulated connected UTAdvanced controllers through the RS485 communication by touch panel operation*
  • Custom display
    You can make graphic objects which can be shown stock preparation process*
  • Powerful calculation function
    Pulp dry mass fow calculation and other sequential control for stock preparation can be realized by powerful embedded calculation functions*
    *Mandatory options: /C3,/CG and /MT (SMARTDAC+)
    RS485 communication (UTAdvanced)

Benefits

  • Integration of controller and recorder brings cost saving
  • Dust-proof and water proof front panel (IP65, NEMA No.250 TYPE4* compliant)
    *Except external icing test

Technologies Commit Users' Benefits

Inductive Conductivity SensorsOur Goal
Our shared goal is customer satisfaction through operational excellence.
Yokogawa has brought true innovations to industry. We are committed to ensuring accuracy, reliability, and safety of your production system throughout your business life cycle. Our comprehensive solutions and expertise help you achieve more results with less total costs of ownership. Below key technologies shall aim for your operational excellence.

Dual Frequency Coil Excitation

Inductive Conductivity Sensors

The ISC sensors use a high performance engineering plastic of PEEK (polyetheretherketone) that provides abrasion and corrosion resistance.

The sensor has a large bore (17mm) for optimal resistance to fouling processes and when properly installed ,the flow will keep the sensor clean, to help avoid measuring errors. This large bore also allows quick response even on low flow measurement. Also available upon request is a PFA lined sensor that provides excellent heat and chemical resistance.

Manual Operation

Dual Frequency Coil Excitation

Magnetic Flow Meters measure flow volume with Faraday's law. The frequency of excitation current given to coils affects in the measurement accuracy and response time. Dual Frequency Coil Excitation is Yokogawa's original technology to ensure ± 0.35 % accurate measurement as well as 0.1 second fast response simultaneously.

Our signal processing technique enables us to bring the benefits of an AC & DC magnetic flow meter into a single magnetic flow meter.

Dust-Proof and Water-Proof Front Panel

Manual Operation "Hard Manual"

Independent manual override is built into the control circuits, ensuring that control output can continue even when a control circuit including the CPU experiences a problem.

Dust-Proof and Water-Proof Front Panel

DPharp Silicone Resonant Sensor

The front panel has a dust-proof, water-proof design which is compliant with the IEC529-IP65 and NEMA No.250 TYPE4* standard. This structure provides good protection for the recorder's internal components and the removable storage media drive mechanism.

*Except external icing test.

DPharp Silicone Resonant Sensor

DPharp Pressure Transmitters with digital silicon resonant sensor delivers the maximum benefits from the elasticity of the single crystal silicon material while enhancing sensitivity and repeatability. The properties of the resonators remain constant over time. This makes DPharp the ideal pressure sensor for harsh industrial automation environments. DPharp delivers stability, repeatability and reliability that you can rely on.

For Your Operational Excellence

FLXA202 & PEEK sensorInductive Conductivity Transmitter: FLXA202

  • Single stain-resistant sensor covers a wide measuring range
  • Process-independent customized temperature compensation
  • Fieldbus communication capability
  • Intrinsically safe version

FLXA202 & Chemical sensorpH Transmitter: FLXA202

  • Designed for two-wire system configuration
  • Fieldbus communication capability
  • Event logbook
  • Intrinsically safe version

YS1000 seriesSingle Loop Controller: YS1000 Series

  • Tow Programming Method
  • High reliability
  • Compact and Light Weight
  • Expandable I/O
  • Compatible with YS170 and SLPC

SMARTDAC+ Recorder Series, UTAdvanced Controller SeriesControl and Recording Devices: SMARTDAC+ Recorder Series / UTAdvanced Controller Series

  • Variety screen with touch panel operation
  • Robust data recording and SD card available
  • Expandability of control and measurement modules
  • Powerful control function

ADMAGMagnetic Flow Meter: ADMAG AXF Series

  • Best-in-class performance with dual frequency excitation method
  • Predictive electrodes adhesion diagnostics
  • Variety of liners & electrode materials
  • Fieldbus communication capability

iab-app-dpharp-001-en.jpgPressure Transmitter: DPharp EJA/EJX Series

  • Best installed performance
  • Compact and rugged design
  • Multi-sensing digital sensor
  • SIL2 as standard (EJX)
  • Fieldbus communication capability

YTA110Temperature Transmitter: YTA Series

  • High resolution, high stability and high versatility
  • Dual compartment housing for harsh environments
  • SIL2 safety as standard feature
  • Fieldbus communication capability

Subject to change without notice.
All Rights Reserved, Copyright© 2008, Yokogawa Electric Corporation.

ADMAG AXF and SMARTDAC are registered trademark of Yokogawa Electric Corporation.
DPharp is a trademark of Yokogawa Electric Corporation. Ethernet is a registered trademark of Xerox Corporation.
Other company names and product names appearing in this document are registered trademarks or trademarks of their respective holders.

Odvetvia

  • Pulp & Paper

    The paper and pulp industry is highly competitive and must meet ever-changing market needs. Yokogawa helps realize energy-efficient plants which are globally sustainable.

    Vidieť viac

Súvisiace produkty a riešenia

  • 2-Wire Transmitter/Analyzer FLXA202

    The FLEXA™ series analyzers are used for continuous on-line measurements in industrial installations. With an option for single or dual sensor measurement, they are the most flexible two-wire analyzer available.

    Vidieť viac
  • 2-Wire Transmitter/Analyzer FLXA21

    The FLEXA™ series analyzers are used for continuous on-line measurements in industrial installations. With an option for single or dual sensor measurement, they are the most flexible two-wire analyzer available.

    Vidieť viac
  • ADMAG AXF

    The AXF magnetic flow meter is a sophisticated product with outstanding reliability and ease of operation, developed on the basis of decades of field experience. Based on FOUNDATION™ Fieldbus specifications, AXF Fieldbus Magnetic Flow meter models offer more flexible instrumentation.

    Vidieť viac
  • ADMAG CA

    The ADMAG CA magnetic flow meter adopts a system to pick up the electromotive force generated in a fluid by electrodes provided outside a ceramic pipe through the capacitance of the pipe. In addition, the flowmeter employs a prominent high-frequency excitation method that reduces flow noise in low conductivity fluid.

    Vidieť viac
  • Mid-level UT55A/UT52A

    The UT55A and UT52A temperature controllers employ an easy-to-read, 14-segment large color LCD display, along with navigation keys, thus greatly increasing the monitoring and operating capabilities. A ladder sequence function is included as standard. The short depth of the controller helps save instrument panel space. The UT55A/UT52A also support open networks such as Ethernet communication.

    Vidieť viac
  • Touch Screen Paperless Recorder GX10/GX20

    The SMARTDAC+TM GX10/GX20 is a panel mount paperless recorder with a modular architecture on the back panel and has a data logging function to acquire the required data. By supporting not only I/O but also many communication protocols, you can connect to various devices. GX utilizes AI. Supporting FDA 21 CFR Part11 and AMS2750E/NADCAP.

    Vidieť viac
  • YS1310

    The YS1310 Indicator with Alarms is an input indicator that has alarms with two inputs. Two loops can be displayed simultaneously. A high limit alarm, low limit alarm, high-high limit alarm, and low-low limit alarm can be generated for each of the two inputs, and the AND connection or OR connection of arbitrary alarms can be output from a total of 6 contacts.

    Vidieť viac
  • YS1350/YS1360

    The YS1350 is a manual setter that allows for manually outputting setting signals to controllers and the like. The YS1360 is a manual setter that allows for manually outputting operation signals to operation terminals.

    Vidieť viac
  • YS1500

    The YS1500 Indicating Controller incorporates fundamental control functions required for PID control. Necessary functions can be selected in accordance with the user's purpose.

    Vidieť viac
  • YS1700

    The YS1700 Programmable Indicating Controller can be tailored for various applications by running a user program, and offers high reliability thanks to Yokogawa's proprietary technology, user friendliness, and expandability.

    Vidieť viac
  • YTA510 Wireless Temperature Transmitter

    The high performance temperature transmitter YTA510 accepts Thermocouple, RTD, ohms or DC mill volt inputs. The transmitters transmit not only process variables but also the setting parameters using wireless signal. The transmitters run on internal batteries, and the installation cost can be decreased since hard-wiring is not required. The communication is based on ISA100.11a protocol specifications. 

    Vidieť viac
  • Field Wireless

    The flexibility of wireless solutions enables less investment in infrastructure while providing greater insights into plant operations.

    Vidieť viac
  • Magnetic Flowmeters

    Yokogawa's experience with magnetic flowmeters spans decades. Our magnetic flow meters provide flexible configurations for industrial use in most areas.

    Vidieť viac
  • pH and ORP Sensors

    pH electrodes and sensors are the sensing portions of a pH measurement. Various installation options including retractable, flow thru, immersion, and direct insertion. Proper pH electrode/sensor selection is critical for optimal measurement results.

    Vidieť viac
  • Single Loop Controllers

    Single loop controllers receive temperature, flow rate, pressure, and other types of measurement readings from sensors and send corresponding instructions to control elements such as valves in order to maintain these values within a desired range.

    Vidieť viac

Hore