- Take all sensors out and calibrate with
- same SA11
- separate SA11 /additional SA11
- Manual setting of ID-chip using HOST system
- Calibrate one by one
- Use replacement sensors (SWAP)
In case of sensor to be calibrated at other place (e.g. LAB), this measuring point can be still functional using another sensor. In this case, it is preferable to keep the SA11 unit at that location.
Súvisiace produkty a riešenia
-
Digital SMART SENCOM™ Adapter, SA11
Reusable SMART adapter, requiring only the analog sensor to be disposed of when it reaches the end of its lifetime. With the SENCOM 4.0 platform, Yokogawa delivers reduced costs and waste while contributing to its long-term business goals of a sustainable future for all.