About the Customer
Malaysian Gas Processing and
Transmission Company, Malaysia
A Malaysian Gas Processing and Transmission Company a subsidiary of the national oil & gas major, plays a prominent role in the gas business value chain. The company operates as a throughput service company providing the services of processing and transmission of gas to the power generation sectors and various customers.
The company operates six gas processing plants (GPP) in East Coast Penisular, Malaysia and is the country's single largest producer and supplier of sales gas through a nationwide transmission and delivery network. In addition to sales gas, other products (ethane, propane, butane) are sold as feed stocks to downstream petrochemical plants.
Background of This Project
The company was looking for a partner with the right advance process control (APC) technology for its gas processing complex. Yokogawa conducted a feasibility study that would identity suitable technology, determine the areas that could be optimized, and estimate the potential benefits. Completed in 2005, this study found that GPP's No. 2 gas processing plant (GPP 2) was a good candidate for a Yokogawa APC solution.
The Reasons for Selecting Yokogawa
Through this feasibility study, Yokogawa concluded that its APC technology had good potential to bring the company an excellent return on its investment, generating considerable interest among this company's management. After a competitive bidding process, Yokogawa ultimately succeeded in receiving the contract for this prestigious project, and its selection as a preferred vendor was due in good part to its strong expertise in implementing optimization solutions for gas plants.
The Challenges and the Solutions
(1) Continually fluctuating feed gas composition
Efforts to optimize the operations of the gas processing complex were complicated by continual fluctuations in the composition of the feed gas, which came from an offshore field. The resulting changes in the liquid load at the downstream units caused inconsistent product recovery, and this was difficult to manage at the DCS level. However, the multivariable controller is able to sense the changes in composition at an early stage and adjust the parameters to maintain a constant liquid load.
(2) Feed maximization
Constant changes in multiple constraints make it difficult for operators to maximize plant throughput. While respecting safety limits, the APC controller continuously predicts the constraints so that plant throughput can be maximized.
(3) System integration with Honeywell TDC3000 and EPKS systems
OPC data exchange between the APC server and the legacy Windows based application processing platform (APP) node link to the TDC3000 LCN and EPKS required configurations for optimum performance. This problem was tackled by optimizing data scanning and setting the priority for data processing in the APP node.
(1) Rapid return on investment (eight times the CAPEX)
GPP 2, 3, and 4 APC economic benefits exceeded the expected return on investment and annual APC benefits exceeded eight times of CAPEX. This is equivalent to ROI in 1.5 months.
(2) Big jump in product yield
A 4-6% increase in the production of sales gas, ethane, propane, and butane was registered during the successful test run of the APC application due to increase in recovery factor and plant load. This increase in production rate was attributed mainly due to:
- Maximization C2 and C3 Recovery factor
- Maximization of Gas Load
- Maximization of Liquid Load
- Maximization of C4 Recovery from Condensate
- Component shifting to maximize the more valuable product
(3) Major improvement in energy efficiency
A unique energy minimization strategy led to a 2-5% improvement in energy efficiency by optimization of column operating conditions and utilization of recycle stream to recover energy from recycle streams in various plant units.
(4) Operators paradigm shift to Operational Excellence
By constantly adjusting plant parameters that previously had to be manually adjusted by plant operators, the APC controller allows operators to spend more of their time focusing on improving plant efficiency and performance.
To the immense satisfaction of the APC team and customer's management, Yokogawa successfully implemented the APC at all three plants despite working on a tight schedule. This successful initiative has boosted the morale of all engineers and operation technicians at this complex and has spurred new initiatives to implement improvements. Continuing on the success GPP 2, 3, and 4 APC projects, The company has decided to award Yokogawa the contract to implement the APC at GPP 5 and 6.
DCS: Honeywell TDC 3000/ Honeywell EPKS
OPC: APP node
APC suite:Yokogawa Exasmoc Online Multivariable, Model Predictive and Optimizing Controller
Yokogawa Exarqe Robust Quality Estimator Exarqe
Oil & Gas
Yokogawa has a wealth of experience in every part of the oil and gas business, from offshore and onshore facilities to pipelines, terminals, and deepwater operations. We provide solutions that enhance safety, ensure accurate and reliable operation, and increase plant efficiency.
The upstream industry includes offshore and onshore activities including wellhead automation, fractionation, completion, and separation to recover and prepare underground or underwater crude oil and natural gas.
As petroleum is brought to the surface, it must be separated prior to transport. Primary and secondary separation stages commonly distribute gas flow, water flow, and oil flow in three phase separation. Gas movement requires pipeline and can include a fractionation process in the upstream stage prior to movement. Liquids can be placed into a tanks or pipelines and sent for processing, requiring accurate level measurements.
Related Products & Solutions
Platform for Advanced Control and Estimation (Advanced Process Control)
The all inclusive Platform for Advanced Control and Estimation brings multi-variable control, quality estimation, complex custom calculations, and operator user interface design all into one application; in doing so, dramatically reducing deployment time and simplifying maintenance for robust performance.