I don't know how many SMARTDAC+ series GM90PS power supply or GM90MB module bases are necessary.

A module directly linked to another module is called a "unit." One GM90PS power supply module is required for each unit. In a multi-unit configuration, one GX90EX I/O expansion module is required per unit. One GM90MB module base is required for 1 each of all modules except for the power supply modules (namely, the GM10 data acquisition module, the GX90EX I/O expansion module, and each of the GX90_ _ I/O modules).

Ex. 1: 100 ch analog measurement configuration (100 ch/single unit)

  • GM90PS power supply modules: 1
  • GM10 data acquisition modules: 1
  • GX90 XA analog input modules: 10
  • GM90MB module bases: 11 (GM10+GX90XA)

Note: When using the GX90XA-10-T1, the limit is 8 modules 80 ch.

Ex. 2: 420 ch analog measurement configuration (60 ch/unit x 7 units)

  • GM90PS power supply modules: 7 (no. of units)
  • GM10 data acquisition modules: 1
  • GX90EX I/O expansion modules: 7 (no. of units)
  • GX90XA analog input modules: 42
  • GM90MB module base: 50 (GM10 + GX90EX + GX90XA)

Note: Separate LAN cables required for unit-to-unit connections.

 

Related Products & Solutions

  • Modular GM10

    SMARTDAC+TM GM10 data logger has a modular architecture that can acquire necessary data. By supporting not only I/O but also many communication protocols such as 920MHz wireless, Modbus and so on. Monitor and setting changes are available through Bluetooth. Supporting FDA 21 CFR Part11 and AMS2750E/NADCAP.

    See More

Top