Industrial facilities where power and steam is produced (i.e., Cogeneration) exhibit a very good potential for real time monitoring and optimization using Visual MESA Energy Management System.
Based on our extensive experience, overall benefit in the range of 2% to 5% of the total energy cost can be achieved. Expected project payback is always less than one year.
Visual MESA was successfully applied to many industrial facilities worldwide, several of them operating steam and power generation networks of different complexity and capacity but all with energy cost savings.
Several published references reported Visual MESA application success:
Thermal Energy Company (TECO), Houston, TX USA (District Heating and Cooling)
- Multi-Period Optimization of District Energy Supply, Development of Day-Ahead Scheduling to Supplement Real-Time Optimization at TECO, J. Garcia, J. Ruiz, T. Reitmeier, International District Energy Association (IDEA) Annual Conference, Miami, USA, June 2013.
- Utilization of Visual Mesa, Sequential Quadratic Programming, Modeling Software to Economically Optimize Energy Plant Operations, Dan Dennis, Thermal Energy Corporation, International District Energy Association (IDEA) Annual Conference, Indianapolis, USA, June 2010.
- Improving Margins through Energy Optimization: Energy Efficiency Improvements at Repsol Química Tarragona plant as a result of implementing a Real Time Optimization System, D. Alonso, G. Morrón, J. P. Ruiz, A. Bolíbar, D. Ruiz, Global Refining Summit, Barcelona, Spain, May 2013.
REPSOL Química Tarragona, Spain (Petrochemical)
Presentation video, Daniel Alonso (REPSOL Química Tarragona) and Diego Ruiz (Soteica Visual MESA)
CEPSA Química San Roque, Spain (Chemical)
Note: International Petroleum Investment Company (IPC) owns 100% of CEPSA since August 2011
- Empowering Operators to Drive Sustainable Savings, T. Reitmeier, Industrial Energy Technology Conference (IETC), New Orleans, May 2013.
- Online Energy Costs Optimizer at Petrochemical Plant, Marcos Kihn, Diego Ruiz, Carlos Ruiz, Antonio García Nogales, Hydrocarbon Engineering, May 2008, Pages 119-123.
- Reducción de Costes Energéticos en Un Complejo Petroquímico, Marcos Kihn, Diego Ruiz, Carlos Ruiz, Antonio García Nogales, Revista Ingeniería Química, España, Nro. 471, 2-6, Mayo 2009.
- Making the Most of it, D. Ruiz and F. Serralunga (Soteica), G.L. Diana, P. Floris and F. Mallica (SARAS SpA, Italy), Hydrocarbon Engineering, pages 23-28, January 2013.
- Industrial Energy Management with Visual MESA at BP Lingen refinery, Availability Department - BP Lingen refinery, Soteica. European Refining Technology Conference (ERTC) Annual Meeting, Vienna, Austria, November 2012.
- Implementation of an Online model for energy costs reduction in a southern Europe refinery, Diego Ruiz, European Refining Technology Conference (ERTC) Energy Efficiency Meeting, Amsterdam, Netherlands, 2012.
- Energy Management: A Polish Case Study, J. Majchrowicz, M. Herra (Grupa LOTOS), F. Serralunga and D. Ruiz (Soteica), Hydrocarbon Engineering, September 2011, pages 41-45.
- Closing The Loop With Visual MESA. The Transition of Air Liquide's Real-Time Utility Optimizer to Closed Loop at the Bayport, Texas Facility, M. Reid, T. Reitmeier, Industrial Energy Technology Conference (IETC), New Orleans, May 2011.
- Industrial Experience on the Implementation of Real Time On Line Energy Management Systems in Sugar and Alcohol Industry, Douglas C. Mariani, Marcos A. Kihn, Carlos A. Ruiz, 10th International Symposium on Process Systems Engineering - PSE2009, Salvador de Bahia, Brazil, Elsevier, August 2009.
- Energy Real-Time Optimizer Baytown Refining/Chemical Complex, M. Lorenz, Industrial Energy Technology Conference (IETC), New Orleans, May 2009.
- Real Time Energy Management at Repsol Cartagena Refinery, Fernán Serralunga, Diego Ruiz, Carlos Ruiz, Process Department REPSOL Cartagena Refinery, European Refining Technology Conference (ERTC) Asset Maximisation, Prague, Czech Republic, May 2009.
- Finding Benefits by Modeling and Optimizing Steam and Power Systems, M. Reid, C. Harper, C. Hayes, Industrial Energy Technology Conference (IETC), New Orleans, May 2008.
- Site Wide Energy Cost Reduction at TOTAL Feyzin Refinery, Departament Procédés - Energie, Logistique, Utilités (TOTAL Raffinerie de Feyzin - France), Jorge Mamprin, Diego Ruiz, Carlos A. Ruiz, European Refining Technology Conference (ERTC) 12th Annual Meeting, Barcelona, Spain, November 2007.
- The Use of an On-line Model for Energy Site Wide Costs Minimization, José Manuel García Casas, Marcos Kihn, Diego Ruiz Massa, Carlos A. Ruiz, European Refining Technology Conference (ERTC) Asset Maximisation, Roma, Italy, May 2007.
- Finding Benefits by Modeling and Optimizing Steam and Power Systems, Bennie Jones and David Nelson, Industrial Energy Technology Conference (IETC), New Orleans, May 2007.
- Online Energy Management, S. Benedicto Calpe, B. Garrote Pazos, D. Ruiz Massa, J. Mamprin, C. Ruiz García, Petroleum Technology Quarterly (PTQ), Q1, 131-138, January 2007.
- Energy System Real Time Optimization, D. Uzturk, H. Franklin, J. Righi, X. van Mechelen, A. Georgiou (ExxonMobil Research and Engineering), NPRA Meeting, Q&A Technology Forum, 2006.
- Reducción de costes energéticos usando una herramienta de optimización en línea, D. Ruiz Massa, C. Ruiz García, David Nelson, Gary Roseme, M. Lázaro Meléndez, M. Sartaguda Pardos; Ingeniería Química, Spain, 108-113, May 2006.
- Reducing Refinery Energy Costs, D. Ruiz, C. Ruiz, D. Nelson, G. Roseme, M. Lázaro M, M. Sartaguda P., Petroleum Technology Quarterly (PTQ), Q1, 103-105, January 2006.
- Energy Costs Reduction By Using An On Line Utilities Optimization Tool, Diego Ruiz Massa, Carlos Ruiz García, David Nelson, Gary Roseme, Manuel Lázaro Meléndez, María Sartaguda Pardos, European Refining Technology Conference (ERTC) Computing, London, UK, June 2004.
- Auditing and Control of Energy Costs in a Large Refinery by Using an On Line Tool, Jorge A. Mamprin, Diego Ruiz Massa, Carlos A. Ruiz, Petróleos de Norte S.A. (Petronor), European Refining Technology Conference (ERTC) Asset Maximisation, Budapest, Hungary, May 2005.
SARAS SpA, Italy (IGCC and Refinery)
BP Lingen, Germany (Refinery)
Raffineria de Milazzo, Italy (Refinery)
LOTOS Gdansk, Poland (Refinery)
Air Liquide, Bayport Plant, TX, USA (Air Plant and Cogeneration)
Usacucar, Brazil (Sugar and Alcohol)
Exxon Mobil, Baytown Refining/Chemical Complex, TX, USA (Refinery, Petrochemical, Olefins, Cogeneration)
REPSOL Cartagena Refinery, Spain
Air Liquide, Bayport Plant, TX, USA (Air Plant and Cogeneration)
TOTAL Feyzin Refinery, France
REPSOL Puertollano Refinery, Spain
INEOS Chocolate Bayou, TX, USA (Olefins Plant)
REPSOL La Coruña Refinery, Spain
Exxon Mobil, Research & Engineering Center, USA
REPSOL Tarragona Refinery, Spain (Refinery plus Olefins, including Cogeneration)
REPSOL Petronor Refinery, Spain
Odvetvia
-
Chemical
Chemical plants rely on continuous and batch production processes, each posing different requirements for a control system. A continuous process calls for a robust and stable control system that will not fail and cause the shutdown of a production line, whereas the emphasis with a batch process is on having a control system that allows great flexibility in making adjustments to formulas, procedures, and the like. Both kinds of systems need to be managed in available quality history of product, and to be able to execute non-routine operations. With its extensive product portfolio, experienced systems engineers, and global sales and service network, Yokogawa has a solution for every plant process.
-
Cogeneration
Cogeneration or combined heat and power (CHP) is an efficient approach to generating power and thermal energy from a single fuel source.
-
Oil & Gas Downstream
The oil & gas downstream industry has been facing an increasing number of challenges in recent years. These include the changing characteristics of the feedstock to be processed, aging of process facilities and equipment, rising cost of energy, lack of skilled plant operators who can run a refinery safely and efficiently, and the ever-changing requirements from both the market and the customer.
Over the years, Yokogawa has partnered with many downstream companies to provide industrial solutions focused on solving these challenges and problems. Yokogawa's VigilantPlant solutions have helped plant owners to achieve maximum profitability and sustainable safety within their plants.
-
Petrochemical
Petrochemical companies’ needs are extremely diverse. To come out ahead in today’s highly competitive marketplace, producers are striving to improve quality and productivity. Yokogawa provides tailor-made solutions for these needs based on its long and wide-ranging experience in this field.
-
Power
In the mid 1970s, Yokogawa entered the power business with the release of the EBS Electric Control System. Since then, Yokogawa has steadfastly continued with the development of our technologies and capabilities for providing the best services and solutions to our customers worldwide.
Yokogawa has operated the global power solutions network to play a more active role in the dynamic global power market. This has allowed closer teamwork within Yokogawa, bringing together our global resources and industry know-how. Yokogawa's power industry experts work together to bring each customer the solution that best suits their sophisticated requirements.
-
Refining
In the ever changing marketplace, refineries are seen not only as crude processing units but also as profit centers. At the same time, there is a keen awareness of the need for safety at such facilities. A total production solution that encompasses planning, scheduling, management, and control is required to achieve long-term goals for profitability, efficiency, and environmental protection. With years of expertise in the automation field, Yokogawa can bring you affordable total solutions for improved operability and a cleaner world.