Easy addition of temporally monitoring into regular monitoring

Download (401 KB)

Production and the plan / improvement department, Maintenance for facilities at site

 

Overview

Since the temperature and humidity in the factory cannot be monitored, workers regularly check the room temperature gauge and fill out forms.
In the measurement points where motors (vibration) are constantly monitored in production equipment, data loggers are prepared and wired every time they are monitored for a certain period of time, such as one month, to collect and manage them data. This increases the workload of workers.

To address this issue, the Multi-Sensing Remote I/O Analog Sensing Unit VZ20X installed near sensors such as temperature, humidity, and vibration, and enables automatic collection of data via the factory LAN. The data collection, monitoring and management can be automatically and regularly monitored with the data logging software GA10. As a result, it contributes to reducing the workload of workers.

Automobile part manufacturer
Automobile part manufacturer

 

Customer benefit

Improvement and integration with VZ20X
  • Regular monitoring by human -> Regular monitoring with VZ20X combing with motor monitoring (Human cost reduction)
  • Temporary motor monitoring -> Portable monitoring with VZ20X (Compact, easy wiring at reasonable cost)

Problems

  • Automate regular humidity and temperature monitoring at sites done by human
  • Need to monitor vibration of some motors permanently
  • In addition, need to add some motors to be monitored unregularly (Require portable monitoring)
  • Measured data should be recorded without using PC

Improvement and integration with VZ20X

Solutions

  • Built complete system with VZ20X, GA10 and GM10
  • Install VZ20X unit as temporary monitoring unit then connect it to GM10

Features

  • Compact and easy connection between GM10 to monitor the data with ethernet cable
  • Realize total system at reasonable cost

Product recommendation

  • Multi-Sensing Remote I/O Analog Sensing Unit VZ20X
    A sample program for system construction is introduced.
    *As of April 2022, the Analog Sensing Unit VZ20X is sold in Asia Pacific and the Middle East areas.
  • Data Logging Software GA10
    60-day free trial is available.
  • Data Logger GM10

Looking for more information on our people, technology and solutions?

Contact Us  

Related Products & Solutions

  • Analog Sensing Unit VZ20X

    VZ20X is a data measuring device that helps achieve “predictive maintenance,” whereby performance degradation and failures in production equipment are prevented before they occur. Providing a solution for optimally timed equipment inspections and replacements, it addresses the issues of reduced uptime and safety caused by failures.

    See More
  • Data Logging Software GA10

    The latest software that enables you to build a DAQ system without programming. Designed for maximum compatibility with Yokogawa recorders, data loggers, temperature controllers, and power monitors, GA10 can also acquire data via Modbus communications.

    See More
  • Modular GM10

    SMARTDAC+TM GM10 data logger has a modular architecture that can acquire necessary data. By supporting not only I/O but also many communication protocols such as 920MHz wireless, Modbus and so on. Monitor and setting changes are available through Bluetooth. Supporting FDA 21 CFR Part11 and AMS2750E/NADCAP.

    See More

Top