Digital SMART SENCOM™ pH/ORP Sensor FU24F

The FU24F is a an all-in-one digital smart pH and ORP sensor made with a chemical resistant PPS 40GF body for harsh pH applications.  It is particularly useful in harsh applications with fluctuating pressure and/or temperature. These processes shorten sensor life because the process fluids move in and out of the sensor under influence of frequent pressure and/or temperature fluctuations. This results in fast desalting and dilution of the reference electrolyte which in turn changes the reference voltage causing a drifting pH measurement.

By integrating the successful Yokogawa patented Bellow design concept within the FU24F electrode, a strong pressure compensation mechanism is created. The built-in bellow ensures immediate interior pressure equalization to the outside pressure, making the sensor virtually insensitive to external pressure variations. A slight overpressure caused by the bellow tension, prevents fluid ingress and maintains a positive ion flow out of the sensor.

  • Solid Platinum ORP/LE electrode for accurate simultaneous pH and ORP measurements
  • Integral Pt1000 element for enhanced pH accuracy
  • Extended life time by saturated Ag/AgCl reference system with double junction combined with ion-trap, and porous PTFE reference diaphragm
  • Easy setup by sensor specific characteristics stored in the sensor itself
  • Simple maintenance by comprehensive design
  • Available in two versions, a robust dome shape model for applications with a limited amount of solids, and a flat surface model for applications in which solids are a considerable component
  • IP67 M9 Cable Connection
  • CE, ATEX, CSA and FM Approval. However *Can only be used General Purpose at this time, because FLXA21 SENCOM™ module and SPS24 Interface box are pending ICECx, ATEX, FM and CSA approval*

 

WU11 Connection Cable

The WU11 interconnection cable is specified for reliable transfer of digital signals between the SENCOM™ sensors and Yokogawa FLXA™ analyzer. It is espically designed to be installed in a heavy industrial environment. The cable is water proof, IP67, allowing it to be submerged as a whole. The cable has a wide temperature operation range which is sufficient for most of the applications. The materials used for the cable are flame retardant to resist the spread of fire.

  • Double shielding to protect connected devices for interference from high voltages and currents
  • Available in four different lengths. Long cable runs up to 100 m (328 ft) are possible
  • Easy connection to a SENCOM™ pH Sensor by one 5- pins molded connector, and to the analyzer by 5 wired pins
  • Flame retardant recognized by UL (fileno. E124763) and CSA (fileno. LL105324)
  • IP67
  • Operating temperature from - 40ºC up to + 85°C (-40ºF up to +185°F)

 

Overzicht:

Wet scrubbers are used in utilities, paper mills, and chemical plants to remove sulfur dioxide (SO2) and other pollutants from gas streams. Undesirable pollutants are removed by contacting the gases with an aqueous solution or slurry containing a sorbent. The most common sorbents are lime, Ca(OH)2, and limestone, CaCO3

Industrieën:
Applicatie informatie
Overzicht:

For control of batch neutralization, a pH measurement coupled with a timer-controlled chemical feed scheme provides very satisfactory results.

This system can be adapted for either acid waste or alkaline waste neutralization.

Applicatie informatie
Overzicht:

There are a number of suppliers of oil and fat products used for edible purposes. These products include, but are not limited to olive oil, peanut oil, soybean oil, sunflower oil, lard, shortening, butter, and margarine. The raw materials for these products include animal by-products, fleshy fruits (palm and olive), and oilseeds. 

Industry:Food and Beverage

Overzicht:

By understanding what causes the difficulties in pH measurements and having the proper equipment, stable and accurate pure water pH measurement can be accomplished.

Overzicht:

The lifetime of a pH sensor has a significant impact on the overall annual costs of a pH measuring loop. Optimizing four key factors will decrease these costs and optimize process control and overall plant efficiency.

Product overzicht

    Overzicht:

    The FU24 is an all-on-one pH and ORP sensor made with a chemical resistant PPS 40GF body for harsh pH applications. It is particularly useful in applications with fluctuating pressure and/or temperature. These processes shorten sensor life because the process fluids move in and out of the sensor under influence of frequent pressure and/or temperature fluctuations. This results in fast desalting and dilution of the reference electrolyte which in turn changes the reference voltage causing a drifting pH measurement.

How-tos

Op zoek naar meer informatie over onze mensen, technologie en oplossingen?


Contact
 
Top