Investing in Yokogawa analyzers and industrial automation solutions equipment is only the start of improvements to your plant’s efficiency and productivity. Our complements its automation products with a rich array of operational support that extend from simple maintenance and repair, all the way to performance optimization.
We supply high quality professional installations, start-up and commissioning as well as training regarding the proper operation and maintenance of the analyzers.
This is critical to ensure the long-term reliable performance of your analytical system. We have the experience and resources to work with you during all phases of the field installation and commissioning.
As part of the our global service team, we can work with you regardless of where the plant site is located.
Analizatory procesowe są narzędziami on-line do analizy procesów przemysłowych. Służą do określania składu chemicznego lub właściwości fizycznych substancji biorących udział w procesach przemysłowych. Umożliwiają optymalizację procesów, ochronę zasobów i zgodność z przepisami ochrony środowiska.
Conductivity meters, analyzers and transmitters are used for continuous process measurement and monitoring of conductivity, resistivity, WIFI, demineralizer water, RO water, percent concentration, boiler blowdown and TDS.
Conductivity sensors and electrodes are used to measure process conductivity, resistivity, WIFI, demineralizer water, RO water, percent concentration, boiler blowdown and TDS. Various installation options including retractable, flow thru, immersion, and direct insertion. Proper electrode/sensor selection is critical for optimal measurement results.
Dissolved Oxygen (DO) meters, analyzers and transmitters are used for continuous process measurement and monitoring of milligrams per liter (mg/l),parts per million (ppm), parts per billion (ppb), or % saturation.
Dissolved Oxygen (DO) electrodes and sensors are the sensing portions of a DO measurement. There are three common technologies for dissolved oxygen measurements: polographic, galvanic and optical. Various installation options including floating ball, retractable, flow thru, immersion, and direct insertion.
Real-time gas analysis enhances efficiency, safety, throughput, product quality, and ensures environmental compliance.
Gas density analyzers and detectors provide continuous measurement of gas density as well as several other valuable parameters, including specific gravity and percent concentration.
Liquid analyzers are used for monitoring process chemistry including water quality, providing process optimization and control.
Oxygen analyzers provide valuable measurements in combustion control, process quality, safety and environmental applications.
pH and ORP meters, analyzers and transmitters are used for continuous process monitoring of pH and ORP to ensure water/product quality, monitor effluent discharge, batch neutralization, pulp stock, scrubbers, cooling towers, chemical, water/wastewater treatment and many other applications.
pH electrodes and sensors are the sensing portions of a pH measurement. Various installation options including retractable, flow thru, immersion, and direct insertion. Proper pH electrode/sensor selection is critical for optimal measurement results.
Process gas chromatographs are used for separating and analyzing chemical compounds in the gas phase of on-line industrial processes.
Yokogawa’s SENCOM SMART Sensor Platform is an innovative analyzer platform that optimizes maintenance, reduces configuration time, and simplifies in-field maintenance and calibration.
Tunable Diode Laser Spectrometer (TDLS) is a laser-based gas analyzer with fast-update optical analysis.