When I start recording with SMARTDAC+ GX/GP series, "E507 No file or directory" appears. What should I do?

The causes of this message appearing are as follows.

  1. When jumping from the alarm summary to a historical trend, recorded data is not found in internal memory
  2. When jumping from the message summary to a historical trend, recorded data is not found in internal memory
  3. If “Scale image” is ON in the display group settings, the scale image has not loaded (in this case, the message appears when performing a group switching operation)

 

Related Products & Solutions

  • Touch Screen GP10/GP20

    SMARTDAC+TM GP10/GP20 is a paperless recorder that provides intuitive, human-centric design, web-enabled functionality, and scalable architecture.

    See More
  • Touch Screen Paperless Recorder GX10/GX20

    The SMARTDAC+TM GX10/GX20 is a panel mount paperless recorder with a modular architecture on the back panel and has a data logging function to acquire the required data. By supporting not only I/O but also many communication protocols, you can connect to various devices. GX utilizes AI. Supporting FDA 21 CFR Part11 and AMS2750E/NADCAP.

    See More

Top