Australasia AU   
The interval of the high limit on rate-of-change alarm and lower limit on rate-of-change alarm is determined by multiplying the scan interval by the number of times sampled. Where do you set the scan interval?

The interval of the high limit on rate-of-change alarm and lower limit on rate-of-change alarm is determined by multiplying the scan interval by the number of times sampled. Where do you set the scan interval?

To set the scan interval, press MENU (to switch to setting mode), hold down FUNC for 3 seconds (to switch to basic setting mode), and select the Menu tab > A/D, Memory.
For details, see section 3.1, “Setting the Scan Interval and the Integration Time of the A/D Converter” in the user's manual (IM 04L41B01-01E).

Related Products & Solutions

  • Button Operated DX1000/DX2000

    The Daqstation DX1000/2000 series is a data acquisition system with display. Its HMI supports custom graphics for industry applications, audit trail and advanced security conforming to FDA 21CFR Part 11.

    See More

  • Removable Chassis DX1000N

    The DX1000N features a removable chassis via the front panel of the instrument. This allows easy access and maintenance of internal components of the DX1000N.

    See More
Top