Ability to use "AND/OR" conditions for alarm relay contact output.

Q:
I'm considering a µR series model with the alarm relay contact output option (/A1-/A5). When assigning multiple alarms to a single alarm relay contact output, can I make it so that the relay operates if just one alarm occurs? (OR operation) How about if all alarms occur? (AND operation)

A:
Yes, you can choose AND/OR operation with the µR series alarm relay contact output models.

Related Products & Solutions

  • µR10000 & µR20000

    The μR series are the compact industrial recorders with the recording widths of 100 mm (μR10000) and 180 mm (μR20000). Measured data can be saved to an SD memory card while recording on chart paper.

    See More

Top