Simple data logging system utilizing USB power supply of VZ20X
Customers want to monitor the amount of electricity consumed by each production equipment in order to conserve energy in the factory, but it is not easy to install a measurement system in existing equipment, even from the installation and wiring conditions.
The Multi-Sensing Remote I/O Analog Sensing Unit VZ20X compact size allows it to be installed for existing conditions. Accurate sensing also contributes to the visualization of power usage at production equipment.
Customer benefit
Contributes to visualization of power usage in production equipment.
Problems
- Customers want to easily measure the power consumption of the control board.
- Customers want a small data logger because they want to install it inside the existing control panel.
- Customers want to use an existing wireless LAN (Wi-Fi) to acquire data.
Solutions
- The small current converter and VZ20X allow you to measure the current.
- The VZ20X and Data Logging Software GA10 can easily acquire and monitor data.
Features
- One VZ20X measures DC voltage, unified signals, resistance, and temperature.
- The compact size allows installation in your existing equipment.
- GA10 calculates and monitors watt-hours.
Product recommendation
- Multi-Sensing Remote I/O Analog Sensing Unit VZ20X
A sample program for system construction is introduced.
*As of April 2022, the Analog Sensing Unit VZ20X is sold in Asia Pacific and the Middle East areas. - Data Logging Software GA10
60-day free trial is available.
Looking for more information on our people, technology and solutions?
Contact UsKapcsolódó termékek és megoldások
-
Analog Sensing Unit VZ20X
VZ20X is a data measuring device that helps achieve “predictive maintenance,” whereby performance degradation and failures in production equipment are prevented before they occur. Providing a solution for optimally timed equipment inspections and replacements, it addresses the issues of reduced uptime and safety caused by failures.
-
Data Logging Software GA10
The latest software that enables you to build a DAQ system without programming. Designed for maximum compatibility with Yokogawa recorders, data loggers, temperature controllers, and power monitors, GA10 can also acquire data via Modbus communications.