- Location: Hallett, South Australia, Australia
- Output/fuel: 200MW gas and oil fired
- Owners: AGL Power Generation, Australia
- Overview: AGL Hallett Power Station is a peak power station which provides South Australia with electricity in times of high electricity demand. The plant ensures a stable supply of electricity to the state.
Unified Operator Interface Solution Enables Remote Operation / AGL Hallet Power Station, Australia
- Operation date: 2002
- Project type: Greenfield site
- Plant configuration:
- Gas turbines: 12 second hand Frame 5 gas turbines, manufactured under license to GE by John Brown, AEG and Nuovo Pignone, originally located at sites in Australia, Canary Islands, Chile and Finland.
- Overview: This peak power plant was built in 2001 by AGL in response to growing summer demand in South Australia. It reduces the likelihood that power blackouts will occur and keeps electricity prices stable during periods of peak demand.Yokogawa Australia provided system engineering, installation support and commissioning services for the project. The company also supplied most of the field instruments.
- Remote control and operation:
The plant owner needed to remotely operate up to 12 gas turbines from an existing control center in the city of Melbourne which is more than 900 km away from the plant site.
- Fast track project:
The project needed to be completed before the arrival of the Australian summer (2002). System equipment had to be delivered within three months of the initial order.
- Flexible operation:
The customer called for effective turbine operation to meet the needs for a power station operating in intermittent peaking mode.
- Unified Operator Interface (UOI):
The CENTUM CS 3000 / UOI was selected for this project. The control platform in the UOI is the GE Fanuc CIMPLICITY Human Machine Interface (HMI) system, which fully integrates the controls for the turbine and BOP auxiliaries and uses the same screens/formats at both the turbine and BOP HMI displays. The CIMPLICITY HMI used in the UOI is a SCADA based design that fully supports the customer's requirement for remote operation capability.
- No delivery delay:
In close cooperation with Yokogawa's factory in Singapore, Yokogawa Australia supplied fully engineered control systems on schedule.
- Automatic turbine optimizer:
The embedded automatic optimizer schedules and selects turbines to run to fulfill changing peaking market demands.
- Control scope:
Interface to GE SPEEDTRONIC Mark V Turbine Controllers
Balance of Plant (BOP) Control
Interface to ALSTOM SCADA
Interface to electricity market network for load dispatch(Electranet / NEMMCO)
- System equipment:
CENTUM CS 3000 / UOI
In the mid 1970s, Yokogawa entered the power business with the release of the EBS Electric Control System. Since then, Yokogawa has steadfastly continued with the development of our technologies and capabilities for providing the best services and solutions to our customers worldwide.
Yokogawa has operated the global power solutions network to play a more active role in the dynamic global power market. This has allowed closer teamwork within Yokogawa, bringing together our global resources and industry know-how. Yokogawa's power industry experts work together to bring each customer the solution that best suits their sophisticated requirements.
Thermal power using coal, oil or gas as fuel accounts for the majority of electric generation throughout the world.