UBE Chemicals(Asia) Public Co., Ltd., Rayong, Thailand
Established on February 1, 2010 through a merger of Thai Caprolactam Public Company Limited (TCL) and Ube Nylon (Thailand) Limited (UNT), UBE Chemicals (Asia) Public Company Limited (UCHA) is the only producer and distributor of caprolactam and ammonium sulfate in Southeast Asia and the first specialist manufacturer in Thailand with the ability to produce nylon-6 resin, from monomer to compound.
The company's production technology is licensed from UBE Industries Ltd., a world leading producer of caprolactam and nylon-6 that has 50 years' experience in this field. The current annual production figures for UCHA's nylon-2 plant in Rayong, Thailand are as follows:
Caprolactam (a raw material used in nylon-6 production): 110,000 tons
Ammonium sulfate: 440,000 tons
Nylon-6 (monofilament grade, film grade, injection grade): 74,500 tons
Nylon compounds: 6,000 tons
Nylon is a widely used material in the automobile industry because it is heat resistant. In addition to engine parts, it can be found in oil containers, wire harness connectors, fuse boxes, cylinder head covers, crankcases, timing belts, and wheels as well as motorcycle body frames. Nylon is also utilized in tire cords to increase their strength, and there is a growing trend to use nylon compounds in such components as intake manifolds and automotive modules.
UCHA is focused on becoming more competitive while maintaining high quality and safety. The company has ISO 9001, ISO 14001, and OHSAS 18001 certification and strictly follows quality and process improvement practices such as total productive manufacturing (TPM), Kaizen, and 5S.
At the Rayong nylon-2 plant, Yokogawa Thailand successfully installed the CENTUM VP production control system, and the plant is now operating very smoothly.
The Challenges and the Solutions
1. Excellence in production
Always looking for new technology that can improve production efficiency, UCHA opted for CENTUM VP, Yokogawa's latest process control system, at its new nylon-2 plant. All auxiliary control systems running on packaged PLCs were integrated with CENTUM VP through a Modbus interface, allowing the display of all process data at operator terminals. A rich variety of data is displayed on the CENTUM VP human machine interface, but it can be easily accessed by the UCHA operators and engineers thanks to a very ergonomic design. The Exaquantum plant information management package runs under CENTUM VP, allowing the assignment of more than 2,000 types of process data. UCHA now uses Exaquantum for reports, plant performance calculation, and operation data analysis. A fiber optic link to a nearby UBE fine chemical plant allows all important production data to be monitored in a plant information system and to be accessed at UBE's Japan headquarters. Together, Yokogawa's reliable CENTUM VP control system and the Exaquantum data collection and analysis package are contributing to production excellence at UCHA.
Central control room
2. Asset management: FOUNDATION™ fieldbus + PRM
UCHA's operation and maintenance teams conducted a study at the beginning of the engineering phase at the nylon-2 plant to classify and rank each field device according to quality and safety criteria. In so doing, they established a standard maintenance interval for each device. At the plant startup stage, PRM was used together with FieldMate to thoroughly check all loops and confirm the characteristics of each control valve. This was much more efficient than the former labor-intensive manual loop checks. Today the plant is operating normally. Field operators check all the field devices every shift and the maintenance department is using PRM to check the condition of all the field devices on a monthly basis. Based on the classification/ranking and the results of using PRM, UCHA is now considering additional proactive maintenance measures to reduce maintenance costs.
Vasit Chavanavatch, Control & Application Engineering Manager, said, "The nylon-2 plant just started commercial operation in 2010. At this time, Yokogawa's DCS is operating well. This DCS is quite a new system for the UBE plants in Thailand, but CENTUM VP's human machine interface is very easy to use and the density of valuable data in each display helps us improve our operational efficiency. Our first phase target was to start up this new plant smoothly, and we completed that without any severe problems. We are now looking to make further use of the connection between our FOUNDATION fieldbus devices and the PRM package, using data from the devices not only for proactive maintenance but also process analysis."
Chemia specjalistyczna i wysokowartościowa
Yokogawa has long served customers in the specialty and fine chemicals market. With a market leading batch solution that offers the best in class reliability and flexibility as well as industry experts who understand the complex requirements in designing a batch solution, you can be assured that in your partnership with Yokogawa you will have a system that will enable you to produce products that meet your customers’ needs in the future while maintaining safety and regulatory compliance.
Chemical plants rely on continuous and batch production processes, each posing different requirements for a control system. A continuous process calls for a robust and stable control system that will not fail and cause the shutdown of a production line, whereas the emphasis with a batch process is on having a control system that allows great flexibility in making adjustments to formulas, procedures, and the like. Both kinds of systems need to be managed in available quality history of product, and to be able to execute non-routine operations. With its extensive product portfolio, experienced systems engineers, and global sales and service network, Yokogawa has a solution for every plant process.
Powiązane produkty i rozwiązania
Mobile Field Device Management FieldMate
FieldMate 3.0 is a PC based tool that enables you to see intelligent field devices clearly, know their condition in advance, and act with agility throughout maintenance work flow.
Plant Information Management System (Exaquantum)
Exaquantum can acquire data from all facets of a process and transform that data into easily usable, high-value, widely distributed information.
Plant Resource Manager (PRM)
Have the facility managed properly for high-reliable and stable plant operation? PRM contributes to improving the quality of maintenance plans and optimizing maintenance costs throughout the plant life cycle.
Distributed Control System (DCS)
Our distributed control system (DCS) enables automation and control of industrial processes and enhanced business performance. Over 10,000 plants entrust Yokogawa DCS to deliver their production goals.