Executive Summary
UBE Chemicals(Asia) Public Co., Ltd., Rayong, Thailand
Established on February 1, 2010 through a merger of Thai Caprolactam Public Company Limited (TCL) and Ube Nylon (Thailand) Limited (UNT), UBE Chemicals (Asia) Public Company Limited (UCHA) is the only producer and distributor of caprolactam and ammonium sulfate in Southeast Asia and the first specialist manufacturer in Thailand with the ability to produce nylon-6 resin, from monomer to compound.
The company's production technology is licensed from UBE Industries Ltd., a world leading producer of caprolactam and nylon-6 that has 50 years' experience in this field. The current annual production figures for UCHA's nylon-2 plant in Rayong, Thailand are as follows:
Caprolactam (a raw material used in nylon-6 production): 110,000 tons
Ammonium sulfate: 440,000 tons
Nylon-6 (monofilament grade, film grade, injection grade): 74,500 tons
Nylon compounds: 6,000 tons
Nylon is a widely used material in the automobile industry because it is heat resistant. In addition to engine parts, it can be found in oil containers, wire harness connectors, fuse boxes, cylinder head covers, crankcases, timing belts, and wheels as well as motorcycle body frames. Nylon is also utilized in tire cords to increase their strength, and there is a growing trend to use nylon compounds in such components as intake manifolds and automotive modules.
UCHA is focused on becoming more competitive while maintaining high quality and safety. The company has ISO 9001, ISO 14001, and OHSAS 18001 certification and strictly follows quality and process improvement practices such as total productive manufacturing (TPM), Kaizen, and 5S.
At the Rayong nylon-2 plant, Yokogawa Thailand successfully installed the CENTUM VP production control system, and the plant is now operating very smoothly.
The Challenges and the Solutions
1. Excellence in production
Always looking for new technology that can improve production efficiency, UCHA opted for CENTUM VP, Yokogawa's latest process control system, at its new nylon-2 plant. All auxiliary control systems running on packaged PLCs were integrated with CENTUM VP through a Modbus interface, allowing the display of all process data at operator terminals. A rich variety of data is displayed on the CENTUM VP human machine interface, but it can be easily accessed by the UCHA operators and engineers thanks to a very ergonomic design. The Exaquantum plant information management package runs under CENTUM VP, allowing the assignment of more than 2,000 types of process data. UCHA now uses Exaquantum for reports, plant performance calculation, and operation data analysis. A fiber optic link to a nearby UBE fine chemical plant allows all important production data to be monitored in a plant information system and to be accessed at UBE's Japan headquarters. Together, Yokogawa's reliable CENTUM VP control system and the Exaquantum data collection and analysis package are contributing to production excellence at UCHA.
Central control room
2. Asset management: FOUNDATION™ fieldbus + PRM
UCHA's operation and maintenance teams conducted a study at the beginning of the engineering phase at the nylon-2 plant to classify and rank each field device according to quality and safety criteria. In so doing, they established a standard maintenance interval for each device. At the plant startup stage, PRM was used together with FieldMate to thoroughly check all loops and confirm the characteristics of each control valve. This was much more efficient than the former labor-intensive manual loop checks. Today the plant is operating normally. Field operators check all the field devices every shift and the maintenance department is using PRM to check the condition of all the field devices on a monthly basis. Based on the classification/ranking and the results of using PRM, UCHA is now considering additional proactive maintenance measures to reduce maintenance costs.
Customer Satisfaction
Vasit Chavanavatch, Control & Application Engineering Manager, said, "The nylon-2 plant just started commercial operation in 2010. At this time, Yokogawa's DCS is operating well. This DCS is quite a new system for the UBE plants in Thailand, but CENTUM VP's human machine interface is very easy to use and the density of valuable data in each display helps us improve our operational efficiency. Our first phase target was to start up this new plant smoothly, and we completed that without any severe problems. We are now looking to make further use of the connection between our FOUNDATION fieldbus devices and the PRM package, using data from the devices not only for proactive maintenance but also process analysis."
Mr. Chavanavatch
Industrieën
-
Chemie
Chemische fabrieken zijn afhankelijk van continu- en batch-productieprocessen die elk verschillende eisen stellen aan een besturingssysteem. Een continu proces vereist een robuust en stabiel besturingssysteem dat niet faalt en de productielijn doet stilvallen. Bij een batchproces ligt de nadruk ligt op een besturingssysteem dat een grote flexibiliteit biedt bij het aanpassen van o.a. formules en procedures. Beide soorten systemen moeten worden beheerd naar aanleiding van de productiegeschiedenis rond de kwaliteit van het product, en in staat zijn om niet-routinematige werkzaamheden uit te voeren. Met een uitgebreide productportfolio, ervaren systeemingenieurs en wereldwijde verkoop- en servicenetwerk heeft Yokogawa een oplossing voor elk fabrieksproces.
-
Specialistisch en fijn chemisch
Yokogawa bedient al lange tijd klanten in de speciaal- en fijn chemie. Met een toonaangevende batchoplossing die de beste betrouwbaarheid en flexibiliteit in zijn klasse biedt, alsmede industrie-experts die de complexe eisen begrijpen die bij het ontwerpen van een batchoplossing komen kijken, kunt u er zeker van zijn dat u in samenwerking met Yokogawa een systeem krijgt waarmee u in de toekomst producten kunt produceren die voldoen aan de behoeften van uw klanten, terwijl de veiligheid en de naleving van de regelgeving gewaarborgd blijven.
Gerelateerde producten & oplossingen
-
Mobile Field Device Management FieldMate
FieldMate 3.0 is a PC based tool that enables you to see intelligent field devices clearly, know their condition in advance, and act with agility throughout maintenance work flow.
-
Plant Information Management System (Exaquantum)
Exaquantum can acquire data from all facets of a process and transform that data into easily usable, high-value, widely distributed information.
-
Plant Resource Manager (PRM)
PRM draagt bij aan het verbeteren van de kwaliteit van onderhoudsplannen en het optimaliseren van de onderhoudskosten gedurende de gehele levenscyclus van de installatie.
-
Gedistribueerd besturingssysteem (DCS)
De DCS maakt automatisering en controle van industriële processen en verbeterde bedrijfsprestaties mogelijk. Meer dan 10.000 fabrieken vertrouwen op Yokogawa DCS om hun productiedoelen te bereiken.