The following shows you how to assign 2 instances of Gate to DAQLOGGER. Launch GateDX-P, then click the ENVI button in DAQLOGGER manager.
- After GateDX-P starts, click the ENVI button in DAQLOGGER manager.
- Assign 2 Gates
- Click the address field of the first Gate, enter the port number and address, check the system number specification, and then set it to 0.
- Enter the same port number and address for the second Gate, and set the system number to 1.
* When assigning the DX100P/DX200P on the GateDX-P side, the DX100P/DX200P assigned to "Number 1" is "System number 0," and the DX100P/DX200P assigned to "Number 2" is "System number 1." - Perform automatic model determination on each Gate.
- Assign the DX100P/DX200P channels to tags.
Les produits et solutions liés
-
DX100P/DX200P Paperless Recorder
Model Names: DX100P and DX200P
-
VA500
Model Name: VA500
-
VA510
Model Name: VA510
-
VA510/MLT
Model Name: VA510/MLT
-
VA511
Model Name: VA511
-
VA520
Model Name: VA520
-
WX101 DAQLOGGER
Model : WX101
-
WX81 DAQLOGGER Client
Model : WX81