About Nan Ya Plastics Corporation, America
Nan Ya Plastics Corporation, America, South Carolina, USA
Nan Ya Plastics Corporation, America formerly a division of Formosa Plastics, is a global supplier of polyester polymer. The South Carolina plant is the largest among its North American production facilities. Located just outside of Lake City, South Carolina, they produce polyester filament, fiber, and chip (resin) through several fully automated processes. Production lines run 24 hours a day and produce approximately two billion pounds of polyester polymer each year. Highly dedicated to producing high quality products and services to their customers, Nan Ya Plastics Lake City is ISO9001:2008 certified for all products.
The Challenges and the Solutions
Project Execution
Nan Ya had been using the same Yokogawa DCS system since the plant opened in the 1990s without a single unplanned shutdown. Nan Ya wanted to upgrade their Micro-XL DCS system in order to benefit from the latest technology in addition to reducing the footprint of the hardware. The primary concerns that had been delaying an upgrade were cost outlay and down-time.
To help customers like Nan Ya, Yokogawa has invested heavily in the research and development of CENTUM DCS in order to devise a step-by-step approach that keeps downtime to a minimum. Yokogawa developed a solution with Nan Ya to replace their old operator stations with new HMIs first and then replace the hardware. Older controllers in the field were also replaced. Nan Ya scheduled a week long outage, but the Yokogawa step-by-step upgrade solution was completed in one and a half days.
Map data ©2018 Google
Operational Efficiency
Due to the user-friendly interface of the CENTUM VP HMI stations, operators were able to work more efficiently, make changes more swiftly and see more accurate graphics. The installation of a large flat screen display allowed for improved process monitoring because all of the production line’s most critical quality control points can now be viewed without changing screens.
Process Insight
The new system allowed for greater visibility into various aspects of Nan Ya’s processes, allowing for faster and deeper analysis. More measurements could be tracked, allowing analysis of trends and greater access to the information needed to make impactful decisions. The improvement in process data access and reporting capabilities also enabled improved process analysis by operators and plant management. Knowing that CENTUM VP is "future-proof," allows plant management to engage in longer view planning cycles and ensure greater sustainability.
Customer Satisfaction
Nan Ya Plastics Corporation, America was very pleased with Yokogawa’s project execution, especially with the reduction in down time. "Yokogawa’s project organization, acceptance testing procedures, and attention to every detail resulted in a seamless migration from a Micro-XL system to the new CENTUM VP. Yokogawa was able to meet a challenging production schedule to complete this project with no negative impact to our plant."
- Ron Lindley, Section Manager
Iparágak
-
Speciális és finomvegyszerek
Yokogawa has long served customers in the specialty and fine chemicals market. With a market leading batch solution that offers the best in class reliability and flexibility as well as industry experts who understand the complex requirements in designing a batch solution, you can be assured that in your partnership with Yokogawa you will have a system that will enable you to produce products that meet your customers’ needs in the future while maintaining safety and regulatory compliance.
-
Vegyi
Chemical plants rely on continuous and batch production processes, each posing different requirements for a control system. A continuous process calls for a robust and stable control system that will not fail and cause the shutdown of a production line, whereas the emphasis with a batch process is on having a control system that allows great flexibility in making adjustments to formulas, procedures, and the like. Both kinds of systems need to be managed in available quality history of product, and to be able to execute non-routine operations. With its extensive product portfolio, experienced systems engineers, and global sales and service network, Yokogawa has a solution for every plant process.
Kapcsolódó termékek és megoldások
-
CENTUM VP
CENTUM VP has a simple and common architecture consisting of human machine interfaces, field control stations, and a control network.
-
Distributed Control System (DCS)
Our distributed control system (DCS) enables automation and control of industrial processes and enhanced business performance. Over 30,000 systems entrust Yokogawa DCS to deliver their production goals.