Introduction
In Bioscience company’s pH is used at various places including glass lined reactor for product efficiency.One of such measurement of pH inreactor as explained below.
Application Information
Typical example of process is:
Reactor used is GLASS LINED REACTOR and length is 1950 mm; and flange size 100 mm split flange with 8 holes PCB (fixing hole center to center) 190 mm; flange outer to outer 225 mm; flange extension pipe (Nozzle) ID 95 mm.
Nature of fluid: Aqueous media Operating temp & pressure: 30°C temp & atmosphere pressure Area classification - Example Zone 1 / Zone 2 Nozzle ID: 95 mm.
Product Recommendation
Measurement System
Process Liquid Analyzer:
- FLXA202/FLXA21 with intrinsic safe version; 2-wire pH transmitter
Features
- Dual sensor measurement on 2-wire type analyser;
Tangible benefit:More reliable and accurate analysis of pH which helps to improve end product quality.
Sensor Selection:
Hamilton® POLILYTE HTVP
Features:
- Best measurement accuracy both in high-alkali processes and in samples with very low conductivity.
- Sterilizable and autoclavable
- SINGLE PORE‘s for clog-free contact of electrolyte with measurement medium
- HAMILTON “H” pH glass
- Serialized with batch number
Sensor Accessories
- 5mtrs Cable, Model No.: WU10-V-S-05
- Immersion sensor fitting (Customised): 1900 mm Length, 4" Flange Connection with 8 holes PCB (fixing hole centre to centre) 190 mm; flange outer to outer 225 mm; pipe (Nozzle) ID95 mm. MOC : PTFE.
Les produits et solutions liés
-
2-Wire Transmitter/Analyzer FLXA202
The FLEXA™ series analyzers are used for continuous on-line measurements in industrial installations. With an option for single or dual sensor measurement, they are the most flexible two-wire analyzer available.
-
2-Wire Transmitter/Analyzer FLXA21
The FLEXA™ series analyzers are used for continuous on-line measurements in industrial installations. With an option for single or dual sensor measurement, they are the most flexible two-wire analyzer available.
-
pH and ORP Analyzers
pH and ORP meters, analyzers and transmitters are used for continuous process monitoring of pH and ORP to ensure water/product quality, monitor effluent discharge, batch neutralization, pulp stock, scrubbers, cooling towers, chemical, water/wastewater treatment and many other applications.
-
pH and ORP Sensors
pH electrodes and sensors are the sensing portions of a pH measurement. Various installation options including retractable, flow thru, immersion, and direct insertion. Proper pH electrode/sensor selection is critical for optimal measurement results.