2-Leiter-Analysator FLXA202/21

Die Analysatoren der FLEXA-Serie sind modular gestaltete Analysegeräte für kontinuierlichen Online-Messungen in industriellen Anlagen. Sie ermöglichen Ein- oder Zwei-Sensor-Messungen, was sie zu den derzeit flexibelsten 2-Leiter-Analysegeräten macht.

Mit dem FLXA202 sind mehrfache Analysatoren nicht erforderlich, da er sich vor Ort durch Austausch des internen Messmoduls je nach Bedarf sehr leicht skalieren lässt. Höhere Flexibilität und geringere Betriebskosten sind die Folge.

Details

Unterstützung von bis zu zwei Sensoren

Durch die Installation von bis zu zwei Sensoren ermöglicht der FLXA202 unterbrechungsfreie Messungen sogar während Wartungsarbeiten. Für eine Zwei-Sensor-Messung müssen die Sensormodule den gleichen Parameter aufweisen – pH/ORP und pH/ORP, SC und SC und DO und DO. Die Zwei-Sensor-Messung bietet zusätzliche Funktionen einschließlich diverser, aus den zwei Messparametern berechneter Daten sowie die Option zur Programmierung des Analysators als redundantes System.

Erweiterte Funktionen

Mit dem FLXA202 kann ein Analysator Sensoren für beliebige der folgenden vier Messgrößen betreiben: pH/ORP, konduktive Leitfähigkeit (SC), induktive Leitfähigkeit (ISC) und Gelöstsauerstoff (DO) mit Selbstdiagnosefunktionen. Zusätzliche Funktionen:

  • Kontinuierliche Messung von Sensorimpedanz, Asymmetriepotenzial und Steigung, sowie kontinuierliche Überwachung auf Verschmutzung/Beschädigung der Elektroden, Burnout und Rückgang des Messflüssigkeitsstands (z. B. pH-Analysator)
  • Online-Sensor-Wellnessprüfung für die vorausschauende Wartung

Gut ablesbarer Touchscreen für bessere Bedienbarkeit

Der Analysator der FLEXA-Serie bietet verbesserte Bedienbarkeit mit intuitiver Touchscreen-Bedienung, gut ablesbarer Anzeige und benutzerfreundlichen Hinweisen in 12 Sprachen. Ein Schnellinstallationsmenü für sofortigen Messbetrieb und eine Anzeige des Sensorstatus und der geschätzten verbleibenden Zeit bis zur Wartung erhöhen die Effizienz. Der interaktive Bildschirm befindet sich in einem robusten Aluminium-Druckgussgehäuse (FLXA202) oder in einer Kunststoffkonstruktion (FLXA21).

Modulares Design für mehr Skalierbarkeit

Der Analysator der FLEXA-™ Serie zeichnet sich durch eine modulare Bauweise mit austauschbaren Sensormodulen aus, sodass sich eine Vielzahl von Systemen realisieren lässt. Die Benutzer können selbst entscheiden, ob Sie ein Display brauchen, und können das Gehäusematerial wählen (Kunststoff oder Edelstahl).

Modellnummer
FLXA202

FLXA21
Bereichsklassifizierung Allgemeine Anwendung
Klasse I, Div II (ohne Verwendung der IS-Barriere)
Klasse I, Div I (mit Verwendung der IS-Barriere)
Allgemeine Anwendung
Klasse I, Div II (ohne Verwendung der IS-Barriere)
Klasse I, Div I (mit Verwendung der IS-Barriere)
Gehäusematerial Aluminiumlegierung-Druckguss mit Epoxidbeschichtung (Standardangebot
Aluminiumlegierung-Druckguss mit Urethan oder Korrosionsschutzschicht (lieferbar auf Anfrage)
Kunststoff (Polycarbonat)
Gehäuseklasse IP66 (außer Kanada), Typ 4X (außer Kanada), Typ 3S/4X (Kanada) IP66/ NEMA 4A/ CSA 3S
Spannungsversorgung 2-Leiter 24VDC stromschleifengespeist 2-Leiter 24VDC stromschleifengespeist
Ausgangssignal Bidirektionale digitale HART-Kommunikation, dem mA-Signal (4-20mA) überlagert Bidirektionale digitale HART-Kommunikation, dem mA-Signal (4-20mA) überlagert
Optionale FF (FOUNDATION-Fieldbus) und PF (Profibus)-Kommunikation
  • Verlängerungs-Anschlussbox BA10/WTB10

    Bei größeren Entfernungen zwischen der Messstelle und dem Analysator, insbesondere wenn die Entfernung die Länge der Standard-Elektrodenkabel überschreitet, bietet dieses Anschlusszubehör eine zweckmäßige Möglichkeit zum Anschluss der Sensorkabel an das Messinstrument.

    Mehr anzeigen

Publikationen

Applikations-beschreibungen
Übersicht:

One of the primary applications for high purity water is for boiler feed water. The measurement of pure water pH can be one of the quickest indicators of process contamination in the production or distribution of pure water. Effective chemical treatment of the feed water is vital in maintaining the useful operating life and minimizing maintenance costs of the boiler.

Industry:Power, Pharmaceutical, Common

Industrien:
Industrien:
Applikations-beschreibungen
Übersicht:

Having too much oxygen in the process is not a problem for the biological system; however the cost for generating the oxygen is one of the largest expenses. By obtaining a good representative average of the dissolved oxygen present in the basin could save the plant large amounts of money. For this reason multiple measurements points are sometimes put into place.

Industrien:
Übersicht:

Wet scrubbers are used in utilities, paper mills, and chemical plants to remove sulfur dioxide (SO2) and other pollutants from gas streams. Undesirable pollutants are removed by contacting the gases with an aqueous solution or slurry containing a sorbent. The most common sorbents are lime, Ca(OH)2, and limestone, CaCO3

Industrien:
Applikations-beschreibungen
Übersicht:

Caustic soda and hydrochloric acid, produced in electrolyzer plants, are fundamental materials used in varieties of industries; chemicals, pharmaceuticals, petrol-chemicals, pulp and papers, etc. Profit is the result of the effective production with minimized running / maintenance cost. Proper control of the process brings you stabilized quality of products with the vast operational profit.

Industrien:
Übersicht:

The control of the world's water resource is arguably one of the most important issues. Water demand from industry and domestic users is set to rise throughout the industrialized world. Yokogawa has been applying minimized maintenance measurement systems.

Applikations-beschreibungen
Übersicht:

The proliferation of microorganisms and the resultant formation of slime is a problem which commonly occurs in aqueous systems. Problematic slime producing microbes may include bacteria, fungi and/or algae. Slime deposits typically occur in many industrial aqueous systems including cooling water systems, pulp and paper mill systems, petroleum operations, clay and pigment slurries, recreational water systems, air washer systems, decorative fountains, food, beverage, and industrial process pasteurizers, sweetwater systems, gas scrubber systems, latex systems, industrial lubricants, cutting fluids, etc.

Industry:Refining, Food and beverage, Power, Oil and Gas, Pulp and Paper, Chemical

Industrien:
Applikations-beschreibungen
Industrien:
Applikations-beschreibungen
Übersicht:

For control of batch neutralization, a pH measurement coupled with a timer-controlled chemical feed scheme provides very satisfactory results.

This system can be adapted for either acid waste or alkaline waste neutralization.

Applikations-beschreibungen
Übersicht:

There are a number of suppliers of oil and fat products used for edible purposes. These products include, but are not limited to olive oil, peanut oil, soybean oil, sunflower oil, lard, shortening, butter, and margarine. The raw materials for these products include animal by-products, fleshy fruits (palm and olive), and oilseeds. 

Industry:Food and Beverage

Übersicht:

For safe and efficient operation, the quality of feedwater, steam, and condensate in boiler plants must be controlled and maintained in the most favorable conditions.

Applikations-beschreibungen
Übersicht:

Process liquid analyzers such as pH meters, conductivity meters, ORP meters, and density meters play an important role at electrolysis plants in the control of concentrations of various process solutions. This requires both precision and stability under harsh conditions that include highly corrosive substances, high temperatures, and many impurities.

Übersicht:

Control of sodium chloride (NaCl) concentration at a salt dissolver where solid salt is dissolved in water, is highly important because of the electrolysis efficiency. A conventional way of measuring the concentration of supersaturated NaCl solution had been performed by using non-contact type sensors (e.g., γ-ray density meter) since NaCl, impurities, and precipitates are in the solution.

Übersicht:

In a semiconductor plant, a variety of chemicals are used in various manufacturing processes. The chemicals used for specific purposes are produced by diluting raw liquid with demineralized water using in diluting equipment, and the control of the concentration at this point is performed by conductivity measurement. 

Übersicht:

In the manufacturing process of Pharmaceutical, Chemical and Food & Beverage industries, the cleaning and sterilization of tanks and piping are done with various cleaning solutions, fresh or hot water and steam after manufacturing products. Clean-In-Place (CIP) is the system designed for automatic cleaning and disinfecting.

Applikations-beschreibungen
Übersicht:

Wastes have been considered to be a serious worldwide environmental problem in recent years. Because of increasing pollution, these wastes should be treated. However, industrial wastes can contain a number of valuable organic components. Recovery of these components is important economically. Using conventional distillation techniques, the separation of acetic acid and water is both impractical and uneconomical, because it often requires large number of trays and a high reflux ratio. In practice special techniques are used depending on the concentration of acetic acid. 

Industrien:
Übersicht:

Cyanide-bearing wastewater from mining and electroplating facilities and certain types of chemical plants is toxic and must be treated by oxidation with chlorine or chloride to bring the cyanide concentration within regulatory limits.

Industry:Electrical and Electronics

Applikations-beschreibungen
Übersicht:

Continuous technology improvement is ongoing in the pulp & paper industry to obtain the best possible performance. Problems at the wet end (stock preparation) can rarely be corrected downstream. That is why monitoring and controlling pH in pulp stock is critical to the paper making process. Essentially, at every stage in the manufacture of paper, correct pH values play a vital role.

Applikations-beschreibungen
Übersicht:

Reverse osmosis (RO) is a separation process that uses pressure to force a solution through a membrane that retains the solute on one side and allows the pure solvent to pass to the other side. More formally, it is the process of forcing a solvent from a region of high solute concentration through a membrane to a region of low solute concentration by applying a pressure in excess of the osmotic pressure.

Übersicht:

Continuous technology improvement is ongoing in the pulp & paper industry to obtain the best possible performance. The improved plant performance translates to the higher quality improvement and lower cost, and simultaneously environmental friendly plant operation.

Industrien:
Übersicht:

Wastewater from electroplating facilities and certain types of chemical plants contains toxic forms of hexavalent chromium such as chromate and dichromate. The hexavalent chromium in this wastewater must be reduced before the water can be discharged. This requires a two-step process: hexavalent chromium (CR6) is reduced to trivalent chromium (CR3); and CR3 is precipitated as chromium hydroxide.

Industry:Electrical and Electronics

Applikations-beschreibungen
Übersicht:

Removal of free oil and grease from a wastewater stream reduces the potential for equipment problems to occur further downstream. There are three forms of oil encountered in wastewater treatment at a refinery. 

Industrien:
Applikations-beschreibungen
Übersicht:

Sour Water is the wastewater that is produced from atmospheric and vacuum crude columns at refineries. Hydrogen sulfide and ammonia are typical components in sour water that need to be removed before the water can be reused elsewhere in the plant. Removal of these components is done by sending the sour water from the process to a stripping tower where heat, in the form of steam, is applied.

Industrien:
Applikations-beschreibungen
Übersicht:

Power plant boiler houses designed to burn coal or high sulfur oil are required by Federal and State pollution regulations to "scrub" (remove) sulfur dioxide from flue gasses to meet emission limits. SO2 in flue gasses is known to be harmful to the environment, as it is one contributor to the formation of acid rain. pH control is critical for the proper functioning of the scrubber system.

Industrien:
Übersicht:

Seawater leak detection is the post-condensation water quality management processes. Damage to the ion exchange resin, which deionizes the supplied water, is also monitored during this process, and both of these applications are executed by a conductivity analyzer. (AN10D01P01-01E)

Übersicht:

In the past, the boiler feed tank systems in sugar factories had to be checked several times a day to make sure there were no sugar solution leaks. This was a very laborious process and, as continuous monitoring was not possible, monitoring results were not reliable. When a leak occurred, recovery operations were very costly and time-consuming. (AN10D01K01-02E)

Industrien:
Applikations-beschreibungen
Applikations-beschreibungen
Übersicht:

In flue gas desulfurization systems that use magnesium hydroxide (Mg(OH)2) slurry, the consumption of the desulfurization agent (Mg(OH)2) is controlled by using online pH analyzers. A great concern in the pH measurement is heavy staining of the pH electrodes by the Mg(OH)2 slurry. To ensure accurate measurement, frequent cleaning of the electrodes with an acid is required, adding to both maintenance workload and cost.

Industry:Chemical, Power

Übersicht:

To defray energy costs, many industrial plants have their own boilers to generate steam in order to produce a portion of their energy needs. In addition to generating power, the steam may also be used directly in plant processes or indirectly via heat exchangers or steam jacketed vessels.

Applikations-beschreibungen
Applikations-beschreibungen
Industrien:
Applikations-beschreibungen
Übersicht:

Fish perform all their bodily functions in water. Because fish are totally dependent upon water to breathe, feed and grow, excrete wastes, maintain a salt balance, and reproduce, understanding the physical and chemical qualities of water is critical to successful aquaculture. To a great extent water determines the success or failure of an aquaculture operation.

Applikations-beschreibungen
Übersicht:

In stable dispersion of fine particles is the pre-requisite for the selective flocculation technique involving separation of ultra-fine valuable particles from the gangue. Among mineral processing techniques selective flocculation technique is known to have outstanding potential of capturing the particles of particular mineral in slurry of mixed mineral system by selective adsorption of water soluble polymers known as flocculants.

Technische Berichte
Übersicht:

Yokogawa has been offering the EXA200 series two- wire liquid analyzer for processes since 1990. This analyzer has been used in various fields including the quality control of raw materials in process plants in the electric power and petrochemical industries, reaction management of products, quality control in waste water facilities, and quality monitoring of river water and tap water.

Downloads

Möchten Sie weitere Informationen über unsere Mitarbeiter, Technologien und Lösungen?

Kontakt

Top