Live cell observation and analysis have become increasingly important in accordance with technological progress. Since each cell’s behavior is different even under the same experimental conditions, continuous tracking of a number of individual cells is required. Thus, three-day time-lapse observation was conducted while cells were being cultivated in the CV8000 stage incubator, and tracking analysis was implemented using the obtained images.
The three-day time-lapse observation of the cells in the CV8000 stage incubator demonstrated steady cell division and growth (Fig. 1a). Also, recognition of individual cells using the CV8000 analysis software resulted in numerical data showing an increase in the number of cells (Fig. 1b, c). Next, tracking analysis was conducted: cell migration distance was measured, and a graph was created using Spotfire® (Fig. 2). As a result, it was possible to chronologically track and analyze the transition of cell division, indicating relationships such as in a genealogical tree. A wide variety of data are obtainable using the CV8000 analysis software, including cell area and fluorescence intensity, thus enabling multifaceted evaluation of cell behavior.
Fig. 1: Cell images and recognition results (time-lapse)
Numbers in the images indicate the time passed since the start of imaging.
Steady cell proliferation over time can be observed both from the images and numerical data.
(a) Time-lapse images (original) captured every six hours
(b) Cell recognition images captured every five hours
(c) Change in the number of cells based on the recognition result
- HeLa cells, in which Azami-Green was expressed, were inoculated in an uncoated half-area 96-well glass-bottom plate (Corning #4580) at the ratio of 5,000 cells/well.
- Acquire image with CV7000.
・Objective lens : 10X
・4 images/ well
・Exposure time: 200msec
・Imaging interval: 10 minutes (over three days)
・Cultivation environment on the stage: 37ºC, 5%CO2, forced humidification
- Tracking analysis of captured images was conducted using the CV8000 analysis software; numerical data describing the number of cells, trajectory of the center of gravity of individual cells, and migration distance were obtained, and graphs were created using Spotfire®.
Fig. 2: Calculation of cell migration distance through tracking analysis The trajectory of the center of gravity of individual cells was identified through tracking using the obtained images (a). The thick lines indicate cell contours, and the thin lines in the center show the trajectories of the centers of gravity. A graph of the trajectories of the centers of gravity was created, and the migration distance at each time point, the total migration distance, and the maximum migration distance from the first time point were calculated (b, c, d). Each cell was given a track ID; therefore it was possible to identify cell appearance and disappearance due to cell division. Thus, it is possible to chronologically track and analyze the transition of cell division, indicating relationships such as in a genealogical tree (e).
Spotfire® is a registered trademark of TIBCO Software Inc.
Our Social Medias
We post our information to the following SNSs. Please follow us.
|Follow us||Share our application|
|@Yokogawa_LS||Share on Twitter|
|Yokogawa Life Science||Share on Facebook|
|Yokogawa Life Science||Share on LinkedIn|
Yokogawa's Official Social Media Account List
Les produits et solutions liés
Benchtop CQ1 Confocal System
The CellVoyager CQ1 provides the highest quality confocal images and extended live-cell imaging in a space-saving benchtop design.
CellPathfinder is designed for our HCA systems, CQ1 and the CellVoyager series. From beginners to experts, the analysis software lets you quantify subtle physiological changes and even label-free samples with various graph options.
CV8000 High-Throughput System
CellVoyager CV8000 is the most advanced high-content screening system. The improved built-in incubator lets you analyze extended live cell responses. With its expandability, 4 cameras, 5 lasers and an optional built-in pipettor, the system permits increasingly complex assay development and high-content screening.
Cycle et science de vie
Les systèmes d'analyse de contenus complexes de Yokogawa et les technologies confocales à double disque rotatif fournissent une imagerie cellulaire en direct à haute vitesse et en haute résolution, ce qui permet une recherche de pointe dans le monde entier.
High Content Analysis CellVoyager
Our high-content analysis (HCA) systems utilize powerful software to address a wide range of research applications from basic science to complex compound screening.