Belgium (FR) BE-FR   
If a power failure occurs during operation of the YS1700/YS1500/YS1360/YS1350 in Cascade mode (C) or Automatic mode (A), it goes back to Manual mode (M) after power is restored.Is there a way to make it return to the same mode as before the power failure?
  • Accueil
  • Librairie
  • Ressources
  • Questions fréquentes
  • If a power failure occurs during operation of the YS1700/YS1500/YS1360/YS1350 in Cascade mode (C) or Automatic mode (A), it goes back to Manual mode (M) after power is restored.Is there a way to make it return to the same mode as before the power failure?

If a power failure occurs during operation of the YS1700/YS1500/YS1360/YS1350 in Cascade mode (C) or Automatic mode (A), it goes back to Manual mode (M) after power is restored.Is there a way to make it return to the same mode as before the power failure?

By default, if power is restored following an outage of 2 seconds or longer, the unit resumes operation in Manual mode (M).
Change the setting value of [CONFIG1] > [start] to [AUT].

Les produits et solutions liés

  • YS1350/YS1360

    The YS1350 is a manual setter that allows for manually outputting setting signals to controllers and the like. The YS1360 is a manual setter that allows for manually outputting operation signals to operation terminals.

  • YS1500

    The YS1500 Indicating Controller incorporates fundamental control functions required for PID control. Necessary functions can be selected in accordance with the user's purpose.

  • YS1700

    The YS1700 Programmable Indicating Controller can be tailored for various applications by running a user program, and offers high reliability thanks to Yokogawa's proprietary technology, user friendliness, and expandability.

Haut