China CN   
If a power failure occurs during operation of the YS1700/YS1500/YS1360/YS1350 in Cascade mode (C) or Automatic mode (A), it goes back to Manual mode (M) after power is restored.Is there a way to make it return to the same mode as before the power failure?
  • 主页
  • 资料库
  • 参考
  • 常见问题
  • If a power failure occurs during operation of the YS1700/YS1500/YS1360/YS1350 in Cascade mode (C) or Automatic mode (A), it goes back to Manual mode (M) after power is restored.Is there a way to make it return to the same mode as before the power failure?

If a power failure occurs during operation of the YS1700/YS1500/YS1360/YS1350 in Cascade mode (C) or Automatic mode (A), it goes back to Manual mode (M) after power is restored.Is there a way to make it return to the same mode as before the power failure?

By default, if power is restored following an outage of 2 seconds or longer, the unit resumes operation in Manual mode (M).
Change the setting value of [CONFIG1] > [start] to [AUT].

相关产品&解决方案

  • YS1350/YS1360

    YS1350是一款手动设定装置，可以手动输出设置信号至控制器等设备。YS1360是一款手动设定装置，可以手动输出操作信号至操作终端。

  • YS1500

    YS1500指示控制器具有PID控制所需的基本控制功能。可以根据用户用途选择所需功能。

  • YS1700

    YS1700可编程指示调节器可以通过运行用户程序为各种应用进行定制，并通过横河电机的专有技术、用户友好性和可扩展性提高可靠性。

置顶
WeChat QR Code
横河电机(中国)有限公司