WX82 DAQ32Plus Client | Yokogawa Iberia S.A.

Yokogawa | Co-innovating Tomorrow

WX82 DAQ32Plus Client

Productos y Servicios

Notificar: Este producto fue descontinuado en el Sep 30, 2017. Vea este producto de reemplazo:

Data Logging Software GA10

Remote Monitoring Client for DAQ32Plus

DAQ32Plus Client is client software designed to remotely access the monitor server of DAQ32Plus installed in the server PC on an Ethernet. Simultaneous remote access is possible from a maximum of 8 client PCs on the Ethernet to the DAQ32Plus monitor server of the server PC. In addition, simultaneous access can be made from a separate remote monitoring software component to a maximum of 8 monitor servers for remote monitoring.

Note that the remote monitors for DAQLOGGER Client, DAQ32Plus and DAQ32Plus Client, and data monitor for DAQEXPLORER cannot be used at the same time on the same PC.

Preguntas Frecuentes

An exclamation point "!" is displayed on the DAQ32Plus hard disk icon.

(ns-faq-daqworx-13052-spec)

Preguntas Frecuentes

The DA100 and DAQ32Plus are connected, but I can't record.

(ns-faq-daqworx-13051-connect)

Preguntas Frecuentes

How can I perform strain initial balancing on DAQ32Plus?

(ns-faq-daqworx-13050-spec)

Preguntas Frecuentes

Can I automatically convert measured data files to Excel on DAQ32Plus?

(ns-faq-daqworx-13053-spec)

Preguntas Frecuentes

I want to set an IP address on the DA100 Ethernet module by using DAQ32Plus. When I place the dip switches in Config mode and press "Check," error E3339 appears. How should I enter settings? My PC uses Windows 7, with the latest version of DAQ32Plus.

(ns-faq-daqworx-13064-connect)

Preguntas Frecuentes

How can I view historical data files (*.daq) and reports (*.rbi) from DAQ32 and DAQ32Plus on a Windows 10 PC?

(ns-faq-daqworx-13078-spec)

Preguntas Frecuentes

Can DAQ32 monitor 30 channels worth of data?

(ns-faq-darwin-8023-spec)

Preguntas Frecuentes

How many data can be displayed along the time axis in DAQ32Plus' real time trend display?

(ns-faq-daqworx-13049-spec)

Preguntas Frecuentes

When purchasing a DAQ32Plus upgrade license (WX102UP), what sort of license number is required?

(ns-faq-daqworx-13065-other)

Preguntas Frecuentes

I set the same IP address on the DR241 and PC to connect via Ethernet, but there's no communication.

(ns-faq-daqworx-13039-connect)

Preguntas Frecuentes

Can I monitor and record on two DA100s using DAQ32Plus?

(ns-faq-daqworx-13038-spec)

Preguntas Frecuentes

When assigning DAQ32Plus groups, can I arbitrarily sort channels independently of the sorting on the DA100? Also, can I register channels to multiple groups?

(ns-faq-daqworx-13048-spec)

Preguntas Frecuentes

What communication formats are compatible with DAQ32Plus?

(ns-faq-daqworx-13040-connect)

Preguntas Frecuentes

I've set the host name and port number on the DAQ32Plus client, but am unable to connect.

(ns-faq-daqworx-13043-connect)

Preguntas Frecuentes

How many groups, and how many channels per group can be displayed in the DAQ32Plus real time trend screen? Also, can I set the display span on the DAQ32Plus side only?

(ns-faq-daqworx-13047-spec)

Preguntas Frecuentes

Can I view DAQ32Plus real time trends on multiple PCs?

(ns-faq-daqworx-13046-spec)

Preguntas Frecuentes

I'm using DAQ32Plus. I set an alarm on the DARWIN (DC100). When the measured value rises, an alarm appears in the DARWIN (DC100) screen, but in the DAQ32Plus screen the alarm stays green (doesn't turn red).

(ns-faq-daqworx-13067-soft)

Preguntas Frecuentes

When connecting the DA100 and monitoring trends, the PC's time differs from the time displayed in the trends.

(ns-faq-daqworx-13045-spec)

Preguntas Frecuentes

DAQ32Plus can't communicate with the DA100 via Ethernet.

(ns-faq-daqworx-13042-connect)

Preguntas Frecuentes

When I connect the DA100 via RS-232-C and use DAQ32 Plus to acquire data, the performance bar goes to OVER and I lose data. What should I do?

(ns-faq-darwin-8027-spec)

Preguntas Frecuentes

Can I forcibly turn the alarm output modules ON/OFF from a PC regardless of any input data alarms?

(ns-faq-darwin-8055-spec)

Preguntas Frecuentes

When I add a module and configure the system, are the settings initialized?

(ns-faq-darwin-8058-spec)

Preguntas Frecuentes

I’m trying communication from a RS232C communication module (DT300-31) to a recorder using DAQ32 software, but *E0401 Communication error* is displayed and communication fails.

(ns-faq-darwin-8068-connect)

Preguntas Frecuentes

What is the temperature measurement interval of the universal module's RJC (INT)?

(ns-faq-darwin-8051-spec)

Preguntas Frecuentes

When measuring voltage with a universal input module or DCV/TC input module, what is the limit value where an overrange occurs?

(ns-faq-darwin-8029-spec)

Preguntas Frecuentes

Does DARWIN support Windows XP?

(ns-faq-darwin-8017-spec)

Preguntas Frecuentes

When I changed to Windows 7, I couldn't change the IP address of the Darwin Ethernet module. What should I do?

(ns-faq-darwin-8018-setting)

Preguntas Frecuentes

Can I connect the main unit to a company network?

(ns-faq-darwin-8019-connect)

Preguntas Frecuentes

What internal processing occurs of the DI input (non-voltage contact input) from the universal input module and DCV/TC/DI modules?

(ns-faq-darwin-8050-spec)

Manuales

*Discontinued: WX102 DAQ 32 Plus WX82 DAQ 32 Plus Client Package (4.1 MB)

¿En busca de información adicional sobre Yokogawa Iberia, tecnología y soluciones?