In the DXAdvanced series, there is no bias function for adding or subtracting a specific value to or from the input value. How can I display the measured temperature as 0.5°C higher than the actual input?

In the input range settings, you can add a specific value in the same manner as a bias setting by selecting a scale.
Ex) Set a thermocouple Type-K span of 0-100 DEGC. To display the temperature 0.5DEGC higher, set the following in the input range settings:
Mode = Scale; Type = TC; Range = K, Span lower limit = -0.5; Span upper limit = 99.5; Scale lower limit = 0.0; Scale upper limit = 100.0.

Gerelateerde producten & oplossingen

  • Button Operated DX1000/DX2000

    The Daqstation DX1000/2000 series is a data acquisition system with display. Its HMI supports custom graphics for industry applications, audit trail and advanced security conforming to FDA 21CFR Part 11.

  • Removable Chassis DX1000N

    The DX1000N features a removable chassis via the front panel of the instrument. This allows easy access and maintenance of internal components of the DX1000N.