In the DXAdvanced series, there is no bias function for adding or subtracting a specific value to or from the input value. How can I display the measured temperature as 0.5°C higher than the actual input?

In the input range settings, you can add a specific value in the same manner as a bias setting by selecting a scale.
Ex) Set a thermocouple Type-K span of 0-100 DEGC. To display the temperature 0.5DEGC higher, set the following in the input range settings:
Mode = Scale; Type = TC; Range = K, Span lower limit = -0.5; Span upper limit = 99.5; Scale lower limit = 0.0; Scale upper limit = 100.0.

Zugehörige Produkte & Lösungen

  • DX1000/DX2000 mit Tastenbedienung

    Die Daqstation-DX1000/2000-Serie ist ein Datenerfassungssystem mit Anzeige. Sein HMI unterstützt benutzerdefinierte Grafiken für Industrieanwendungen, Audit Trails und erweiterte Sicherheit nach FDA CFR21 Part 11.

  • DX1000N mit herausnehmbaren Chassis

    Das Chassis des DX1000N kann über die Frontabdeckung des Instruments abgenommen werden. Dies erleichtert den Zugang zu den inneren Komponenten des DX1000N und ihre Wartung.


Top